Previous Article | Next Article ![]()
Journal of Clinical Microbiology, February 2002, p. 501-507, Vol. 40, No. 2
0095-1137/01/$04.00+0 DOI: 10.1128/JCM.40.2.501-507.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Departments of Pathology,1 Microbiology,2 Industrial Health, Osaka Prefectural Institute of Public Health, Higashinari-ku, Osaka 537-0025, Japan3
Received 9 July 2001/ Returned for modification 30 August 2001/ Accepted 28 October 2001
|
|
|---|
|
|
|---|
Recently, a number of genetic changes leading to rifampin, isoniazide, pyrazinamide (PZA), streptomycin, and kanamycin resistances have been characterized. Nearly 95% of rifampin-resistant M. tuberculosis strains carry mutations in a certain region of the beta subunit of the RNA polymerase encoded by the rpoB gene (20, 21). The mutations correlated to isoniazide resistance were found on the katG (25), inhA (1), and ahpC/oxyR (26) genes. Ethambutol-resistant M. tuberculosis strains carried mutations on a certain part of the gene coding for alabinosyl transferase (2, 17). Mutations on the rrs and rpsL genes coding for the 16S ribosomal RNA and ribosome protein S12, respectively, confer streptomycin resistance (8, 11). A part of the kanamycin-resistant phenotype can be detected by identifying the mutations on the rrs gene (19). Missense mutations in the DNA gyrase gene (gyrA) have been reported to be associated with increased levels of resistance to fluoroquinolones (5).
PZA is one of the most important drugs for anti-TB short-course chemotherapy. PZA is converted to pyrazinoic acid by mediation of pyrazinamidase in M. tuberculosis, and it inhibits fatty acid synthesis. Reduced pyrazinamidase activity correlates well with resistance to PZA. The mutations that confer PZA resistance have been investigated on the pyrazinamidase gene (pncA) by Scorpio and Zhang (15). Thus, finding mutations on the pncA gene makes the rapid detection of PZA-resistant M. tuberculosis possible.
A number of rapid and simple methods based on the PCR technique have been developed for the detection of a mutation on the gene responsible for the drug resistance. PCR single-strand conformational polymorphism (21) and molecular beacon sequence analysis (14) are suitable for the detection of a limited number of mutations on specific genes. PCR product direct sequencing and DNA microarray (9) can detect many mutations at the same time. The latter two were suitable for the detection of PZA-resistant M. tuberculosis because the mutations responsible for PZA resistance were dispersed on the pncA gene. However, as these methods require costly apparatus, such as a DNA sequencer or laser scanner, they can not be done in the small clinical laboratory.
In this report, we explain a new technique using PCR and an in vitro transcription-translation coupled system that enabled the rapid pyrazinamidase assay and PZA susceptibility test to be done in the small clinical laboratory. By this method, PZA-resistant M. tuberculosis can be detected within 8 h without costly apparatus.
|
|
|---|
DNA preparation. M. tuberculosis strains were grown on Ogawa medium. Mycobacterial DNA was extracted from a single colony by a combination of chloroform extraction and mechanical disruption (12).
Amplification of the pncA gene carrying the T7 promoter. The pncA gene fragments carrying the T7 promoter sequence were amplified by PCR with the primers shown in Fig. 1. Amplification was performed in a 0.2-ml PCR tube with a total reaction volume of 50 µl by using a personal thermal cycler (Takara Shuzo Co. Ltd., Kyoto, Japan). Each reaction tube contained 2.5 U of Taq DNA polymerase; 200 µM (each) dATP, dCTP, dGTP, and dTTP; 20 mM Tris-HCl; 50 mM KCl; 2.5 mM MgCl2; sample DNA; and the primers presented in Fig. 1 and Table 1. A PCR round was conducted with an initial 1-min denaturation step at 98°C coupled to a repeating cycle of 5 s at 98°C, 10 s at 55°C, and 1 min at 72°C for 35 cycles, followed by a 7-min final extension step at 72°C.
![]() View larger version (17K): [in a new window] |
FIG. 1. Primers used for amplification of the pncA gene of M. tuberculosis. (A) Schematic presentation of the positions of the primers used. (B) Exact positions of the primers used. The sequence TGGT in primer ON00-0016 was converted to AGGA to give an optimum ribosome binding sequence (Shine-Dalgarno sequence) in primer ON00-0116. The sequence ATGC in primer ON00-0046 was converted to ATGA to give a Kozak consensus sequence in primer ON00-0036.
|
|
View this table: [in a new window] |
TABLE 1. Primers used for amplification of the pncA gene
|
Protein synthesis was performed mainly according to the manufacturer's manual. Briefly, the amplified pncA gene fragment was first qualified by analysis by agarose gel electrophoresis with a DNA standard of known concentration, then precipitated by adding 5 µl of 3 M sodium acetate and 1.00 µl of ethanol, and centrifuged at 9,000 x g for 5 min. After being washed with 70% ethanol, the resulting precipitate was dissolved in an appropriate volume of distilled water to bring the solution to a concentration of 100 ng/µl. Then, 2 µl of DNA solution was added to 20 µl of either rabbit reticulocyte lysate, wheat germ lysate, or E. coli S30 lysate containing T7 RNA polymerase. After the addition of 1 µl of 0.5 mM methionine, the in vitro RNA and protein synthesis was performed at 30°C for 0, 60, 90, 120, and 240 min. The resulting lysates were directly used for the micropyrazinamidase assay.
Micropyrazinamidase assay. Measurement of pyrazinamidase activities was performed with some modification of the method described by McClatchy et al. (13). Twenty microliters of the lysate, after the in vitro synthesis of pyrazinamidase, was added to 100 µl of 10 mg of PZA solution/ml in distilled water and incubated for 1 h at 37°C. After incubation, 10 µl of 10% ammonium iron(II) sulfate was added to the reaction mixture, followed by further incubation for 2 h at 37°C. In the case of the experiments with the wheat germ and E. coli lysates, direct measuring of the optical density at 450 nm gave the pyrazinamidase activity because the maximum absorbance of brown product from the pyrazinamidase test was observed at 450 nm. In the case of the experiment with the rabbit reticulocyte lysate, 130 µl of 25% polyethylene glycol 6000 solution was added to the resulting reaction mixture and the red colored hemoglobin interfering with the accurate measurement of pyrazinamidase activity was removed by passing the mixture through a Micropure-EZ centrifuge filter (Millipore Corporation, Bedford, Mass.). Pyrazinamidase activity was then measured by looking at the optical density at 450 nm.
|
|
|---|
Monitoring of in vitro pyrazinamidase synthesis. Pyrazinamidase synthesized by an in vitro transcription-translation coupled system was analyzed by a micropyrazinamidase assay. Figure 2 shows a comparison of the pyrazinamidase activities in the three systems, rabbit reticulocyte, wheat germ, and E. coli S30, with five kinds of PCR products. The highest level of pyrazinamidase activity was obtained by the rabbit reticulocyte lysate system with the DNA amplified by using ON00-0036 and ON00-0012 as primers. The next highest activity was obtained by the rabbit reticulocyte lysate with the DNA amplified by using ON00-0046 and ON00-0012 as primers. Reduced activity was observed with the wheat germ lysate system, and no pyrazinamidase activity was observed with the E. coli S30 system (Fig. 2A to C). Thus, in vitro pyrazinamidase synthesis was optimized by using PCR products amplified with ON00-0036 and ON00-0012 as primers. A time course study of the in vitro pyrazinamidase synthesis was performed with the pncA gene fragment carrying the T7 promoter amplified from M. tuberculosis H37Rv and M. bovis BCG. The 0.2 µg of PCR products was mixed with 20 µl of rabbit reticulocyte lysate and incubated for 30, 60, 90, 120, and 240 min. The pyrazinamidase activities in the reaction mixtures were measured by a micropyrazinamidase assay. The pyrazinamidase activity of the reaction mixture containing M. tuberculosis pncA PCR product increased from 30 to 90 min in a time-dependent manner. In contrast, faint pyrazinamidase activity was observed in the reaction mixture containing the M. bovis BCG pncA PCR product (Fig. 2B). This observation exhibited a good correlation with the pyrazinamidase activity of these bacilli (Table 2). Because the difference between the pyrazinamidase activities reached its maximum at the incubation time of 90 min, we used 90 min for in vitro pyrazinamidase synthesis in the experiments with the clinical isolates.
![]() View larger version (19K): [in a new window] |
FIG. 2. Activities of in vitro-synthesized pyrazinamidase. The pyrazinamidase activities synthesized in rabbit reticulocyte lysate (A), wheat germ lysate (B), and E. coli S30 lysate (C) were examined as described in Materials and Methods. The white, hatched, and filled bars in panels A and B represented the pyrazinamidase activities obtained from the experiments using ON00-0036, ON00-0046, and ON00-0016 as forward primers, respectively. As shown in panel C, although ON00-0116 (bar 4), ON00-0016 (bar 5), and ON00-0017 (bar 6) were used as forward primers for the time course study, no pyrazinamidase activity was observed. (D) The time course study of the pyrazinamidase activities synthesized in rabbit reticulocyte lysate with ON00-0036 as the forward primer was performed. Templates used for the PCR whose results are shown in panel D were M. tuberculosis H37Rv (PZA susceptible; filled square) and M. bovis BCG (PZA resistant; filled circle). OD450, optical density at 450 nm.
|
|
View this table: [in a new window] |
TABLE 2. Characteristics of M. tuberculosis strains examined in this study
|
![]() View larger version (54K): [in a new window] |
FIG. 3. In vitro pyrazinamidase activities of PZA-resistant clinical isolates. (A) The pyrazinamidase activities synthesized with rabbit reticulocyte lysate obtained from the experiments with ON00-0036 as a forward primer were examined. Templates used for the PCR were DNAs from M. tuberculosis H37Rv (PZA susceptible; white bar), M. bovis BCG (PZA resistant; hatched bar), and PZA-resistant clinical isolates (black bars). (B) The same experiments were performed with PZA-susceptible clinical isolates (gray bars), and the results were compared with the results obtained with M. tuberculosis H37Rv (white bar) and M. bovis BCG (hatched bar). (C) The pyrazinamidase activities synthesized with rabbit reticulocyte lysate obtained from the experiments with ON00-0016 as a forward primer were examined. Templates used for the PCR were DNAs from M. tuberculosis H37Rv (white bar) and PZA-resistant clinical isolates (black bar). (D) The same experiments were performed with PZA-susceptible clinical isolates (gray bars), and the results were compared with the results obtained with M. tuberculosis H37Rv (white bar) and M. bovis BCG (hatched bar). OD450, optical density at 450 nm.
|
|
|
|---|
As mentioned above, PZA is a drug that is only active at a low pH of around 5, and the identification of PZA resistance on media is not easy. So, the PZA susceptibility test now depends on the pyrazinamidase test because of the strong correlation of reduced pyrazinamidase activity with the PZA resistance phenotype (4, 13, 22). However, the pyrazinamidase assay method has shortcomings; e.g., it takes at least 3 weeks to prepare a sufficient amount of bacilli and it also takes 4 days for the pyrazinamidase assay. Thus, the in vitro pyrazinamidase synthesis and assay method was designed and examined in this study.
The DNA fragments of the pncA gene of M. tuberculosis carrying the bacteriophage T7 promoter were amplified by PCR, and the pyrazinamidase was synthesized by in vitro transcription-translation coupled systems. Five kinds of PCR products were examined by this system for the ability to produce pyrazinamidase. The DNA sequences attached to the pncA gene were as follows. (i) The T7 promoter sequence and an additional ACC were attached just upstream of the initiation codon, and the sequence around the initiation codon was converted to a Kozak consensus sequence (25) (from ATGC to ATGA, primer ON00-0036). (ii) The T7 promoter sequence and an additional ACC were attached just upstream of the pncA gene initiation codon (primer ON00-0046). (iii) The T7 promoter sequence was attached to the -22 position of the pncA gene (primer ON00-0016). (iv) The T7 promoter sequence was attached to the -22 position of the pncA gene, and the sequence of the putative ribosome binding region was converted to a Shine-Dalgarno consensus sequence (26) (-10 to -7, from TGGT to AGGA, primer ON00-0116). (v) The T7 promoter sequence was attached to the -35 position of the pncA gene (primer ON00-0117). The amplification efficiencies of the pncA gene with each of these primers were almost the same. Thus, the pyrazinamidase activities expressed with the three kinds of lysates, rabbit reticulocyte, wheat germ, and E. coli S30, were examined. From the results, the pncA PCR product carrying the T7 promoter, followed by the initiation codon with a Kozak consensus sequence worked most efficiently with the rabbit reticulocyte lysate. The reason why no pyrazinamidase activity was observed with the E. coli S30 system is not clear. There might exist some incompatibility, such as codon usage and/or molecular chaperon of the amplified pncA gene, with the E. coli S30 system. By using this system, 30 resistant isolates were tested with the in vitro system. Of 30 resistant strains, 28 exhibited reduced pyrazinamidase activity compared to the PZA-susceptible strain H37Rv (Fig. 3A), whereas activities similar to that of H37Rv were obtained with PZA-susceptible clinical isolates (Fig. 3B). Two isolates, TB94-054 and TB98-076, carrying the mutations 8-C
A and 14-T
A, respectively, exhibited pyrazinamidase activities similar to that of strain H37Rv (Table 2) with this method. These mutated bases were included in primer ON00-0036, and the PCR products from these strains had the wild-type sequence. Therefore, the pyrazinamidase activity was exhibited at a level similar to that of the PZA-susceptible strain H37Rv. Although the pyrazinamidase activity expressed was lower with primer ON00-0016 (Fig. 2A), it was necessary to use this primer for looking at the pyrazinamidase activity of TB94-054 and TB98-076. Expectedly, reduced pyrazinamidase activities compared to that of H37Rv were observed with this system (Fig. 3C), whereas activities similar to that of H37Rv were obtained with PZA-susceptible clinical isolates (Fig. 3D). These results indicated the possibility of detecting more than 90% of PZA-resistant M. tuberculosis with the in vitro pyrazinamidase assay method established in this study. In addition, some of the resistant isolates demonstrated weak pyrazinamidase activities by the in vitro method. This might correlate with the MIC, and PZA might still be effective, particularly if it is administered as part of combination therapy. This should be further investigated in future studies.
The steps of the in vitro pyrazinamidase assay method established in this study are presented schematically in Fig. 4. The amounts of time required for DNA extraction, pncA gene amplification, pyrazinamidase in vitro synthesis, and the pyrazinamidase assay were 1, 2 to 4, 1.5, and 3 h, respectively. By this method, the pyrazinamidase activity of M. tuberculosis can be detected within 8 h from clinical isolates and within 10 h from clinical specimens (using nested PCR for amplification of the pncA gene), whereas more than 3 weeks are necessary (3 weeks for the culture and 4 days for the pyrazinamidase test) for the conventional method. The method developed in this study can dramatically reduce the time for the detection of PZA-resistant M. tuberculosis. As the procedure of this method is very simple, safe, and cost saving, the in vitro pyrazinamidase assay method can serve as the standard method for the detection of PZA-resistant M. tuberculosis.
![]() View larger version (27K): [in a new window] |
FIG. 4. Schematic representation of the in vitro pyrazinamidase assay. The in vitro pyrazinamidase assay consisted of four steps. The total time required to complete the procedure is less than 8 h. (A) Extraction of DNAs from samples takes 1 h. (B) PCR amplification of the pncA gene carrying the T7 promoter takes 2 or 4 h. (C) In vitro synthesis of pyrazinamidase takes 1.5 h. (D) The micropyrazinamidase assay to look at the conversion of PZA to pyrazinoic acid (PZacid) takes 3 h. PZase, pyrazinamidase.
|
This work was supported in part by the Health Science Grant "Research on Emerging and Reemerging Diseases" from the Ministry of Health and Welfare, Tokyo, Japan.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»