Previous Article | Next Article ![]()
Journal of Clinical Microbiology, June 2002, p. 2213-2216, Vol. 40, No. 6
0095-1137/02/$04.00+0 DOI: 10.1128/JCM.40.6.2213-2216.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
National Public Health Institute, Department in Turku,1 Turku Graduate School of Biomedical Sciences,2 Departments of Pediatrics,3 Medical Microbiology, University of Turku, Turku, Finland4
Received 10 December 2001/ Returned for modification 23 February 2002/ Accepted 29 March 2002
|
|
|---|
|
|
|---|
During the past 10 years, resurgence of pertussis has been seen in several countries with high vaccination coverage (5, 13, 17). One explanation for the increasing incidence is the antigenic divergence between the vaccine strains and the circulating strains. Recently, antigenic variation of PRN and PT has been reported in Europe and the United States (5, 10, 12, 19, 20). PT is composed of five subunits; the toxic functions are located in the S1 subunit, which consists of 269 amino acids (21, 22). The polymorphism in the PT operon is mainly found in the gene encoding the S1 subunit. To date, four alleles have been described, namely, ptxS1A, ptxS1B, ptxS1D, and ptxS1E (Fig. 1) (19, 20). The strains used for whole-cell or acellular vaccines harbor either the ptxS1B or the ptxS1D allele, whereas most of the strains currently circulating harbor the ptxS1A allele. Only a few strains have been found to harbor the ptxS1E allele. The biological significance of the observed variation is not known and remains to be elucidated. In the United States, three ptxS1 alleles were identified when the ptxS1 genes of 152 B. pertussis strains isolated from 1935 through 1999 were sequenced. The vaccine alleles ptxS1B and ptxS1D were prevalent in the United States from 1935 through 1974. However, the ptxS1A allele replaced the vaccine alleles and has been the most prevalent allele from 1975 to 1987 and 1989 to 1999 (64 and 78%, respectively) (5). Similar trends with respect to the ptxS1 gene have also been observed in Europe (19, 20).
![]() View larger version (7K): [in a new window] |
FIG. 1. Polymorphic nucleotide sequences of the ptxS1 subunit. For ptxS1A, ptxS1B, and ptxS1E, only differences from ptxS1D are indicated. Dots indicate identical bases. Numbers refer to positions in the ptxS1D allele. The nucleotide differences that are used as targets for hybridization probes are boldfaced.
|
![]() View larger version (24K): [in a new window] |
FIG. 2. Schematic diagram of the work flow used in this study to determine the ptxS1 alleles.
|
DNA was extracted from bacterial colonies by using the DNA Isolation Kit for Blood/Bone Marrow/Tissue (Roche Diagnostics GmbH, Mannheim, Germany) according to the manufacturer's instructions. DNA concentrations in all samples were measured with a GeneQuant spectrophotometer (Pharmacia Biotech, Piscataway, N.J.) and were adjusted to 3 ng/µl. DNA preparations were stored at -20°C.
PCR-based sequencing was carried out as described previously (20). For the LightCycler real-time PCR, primers and probes (Table 1) were designed on the basis of the published sequences of the ptxS1 alleles (Fig. 1) and synthesized by TIB Molbiol, Berlin, Germany. Primer pairs BPS/BPRmt1 and BPS/BPRmt2 define 190- and 188-bp gene segments, respectively. The region to which probes QJ 3 BDE and QJ 4 BDE bind contains a stem-loop (GCGC-GCGC) structure. To destroy the interfering loop, reverse primers BP Rmt1 and BP Rmt2 contain a C-to-T modification corresponding to base 685 on the ptxS1D allele (Fig. 1 and Table 1). Probes QJ 3 BDE and QJ 4 BDE are specific for the ptxS1B, ptxS1D, and ptxS1E alleles (Fig. 1) and therefore are capable of differentiating the currently circulating strains with the ptxS1A allele from the strains with other alleles. Probes QJ 5 E and QJ 6 E further differentiate ptxS1E from ptxS1B or ptxS1D (Fig. 1). Probes QJ 4 BDE and QJ 6 E function as the anchor probes in FRET; they are labeled with LightCycler Red 640 and LightCycler Red 705, respectively, at their 5' ends and are phosphorylated at their 3' ends. Probes QJ 3 BDE and QJ 5 E function as sensor probes in FRET and carry fluorescein labels at their 3' ends.
|
View this table: [in a new window] |
TABLE 1. Primers and probes used in this study
|
For differentiation of the ptxS1B, ptxS1D, and ptxS1E alleles from ptxS1A, the final reaction volume of 20 µl contained 2 µl of LightCycler-Fast Start DNA Master Hybridization Probes (containing Taq DNA polymerase, reaction buffer, and a mix of deoxynucleoside triphosphates) and 3 mM MgCl2 (Roche); 4 pmol of the FRET probes QJ 3 BDE and QJ 4 BDE, 8 pmol of primers BP S and BP Rmt1, and 5% dimethyl sulfoxide (Merck, Darmstadt, Germany); and 2 µl of sample DNA. The amplification started with an initial denaturation step at 95°C for 10 min and continued with 40 cycles of denaturation at 95°C for 10 s, annealing at 55°C for 10 s, and extension at 72°C for 9 s. The temperature transition rate was 20°C/s. Fluorescence was measured at 640 nm (F2 channel) at the end of the annealing step of each cycle to monitor the accumulation of the PCR product. After amplification, a melting curve was acquired by heating the product 20°C/s to 95°C, cooling it to 50°C for 30 s, and then heating it 0.1°C/s to 94°C under continuous fluorescence measurement. Three positive controls with DNA isolated from strains with the ptxS1B, ptxS1D, and ptxS1E alleles and a negative control without template DNA were included in each run.
For differentiation of ptxS1E from ptxS1B or ptxS1D, the final reaction volume of 20 µl contained 2 µl of LightCycler-Fast Start DNA Master Hybridization Probes (containing Taq DNA polymerase, reaction buffer, and a mix of deoxynucleoside triphosphates) and 3 mM MgCl2 (Roche); 4 pmol of the FRET probes QJ 5E and QJ 6E, 8 pmol of primers BP S and BP Rmt2, and 5% dimethyl sulfoxide (Merck); and 2 µl of sample DNA. The temperature profile of the real-time PCR included an initial denaturation step at 95°C for 6 min followed by 42 cycles of denaturation at 95°C for 10 s, annealing at 57°C for 10 s, and extension at 72°C for 9 s. The temperature transition rate was 20°C/s. Fluorescence was measured at 705 nm (F3 channel) at the end of the annealing step of each cycle to monitor the accumulation of the PCR product. After amplification, a melting curve was acquired by heating the product 20°C/s to 95°C, cooling it to 50°C for 35 s, and heating it 0.1°C/s to 94°C under continuous fluorescence measurement. A positive control with DNA isolated from the strain with the ptxS1E allele and a negative control without template DNA were included in each run.
Melting curve analysis was accomplished using Light Cycler Software, version 3.5.3, with automated fluorescence gain settings. When the temperature reached the melting temperature (Tm) of the probes, a rapid loss of fluorescence was observed as the two adjacently bound probes dissociated from their complementary targets and the FRET stopped. This was plotted as the negative derivative of fluorescence versus temperature to define the allele-specific melting curves (Fig. 3).
![]() View larger version (17K): [in a new window] |
FIG. 3. (A) Melting curves for the LightCycler QJ3 BDE and QJ4 BDE FRET hybridization probes. The specific melting peak can be observed only for the strains with the ptxS1B, ptxS1D, and ptxS1E alleles. (B) Melting curves for the LightCycler QJ5 E and QJ6 E FRET hybridization probes, demonstrating differentiation of the strains that harbor the ptxS1E allele from the vaccine type strains (ptxS1B and ptxS1D). A specific melting peak can be observed only for the strains with the ptxS1E allele.
|
The ptxS1 alleles of all 57 clinical isolates tested (50 with the ptxS1A allele and 7 with the ptxS1B allele), the 2 Finnish vaccine strains (ptxS1B or ptxS1D), and the 1 reference strain (ptxS1E) were found to be correctly identified by FRET hybridization probe melting curve analysis. Probes QJ 3 BDE and QJ 4 BDE correctly hybridized to and gave signals for PCR products derived from strains harboring the ptxS1B, ptxS1D, or ptxS1E allele (Fig. 3A). Probes QJ 5 E and QJ 6 E hybridized to and gave signals for PCR products derived from strains harboring the ptxS1E allele (Fig. 3B). The specific mean Tm for QJ 3 BDE and QJ 4 BDE was 66.43°C (standard deviation, 0.41°C). The specific mean Tm for QJ 5 E and QJ 6E was 66.43°C (standard deviation, 0.17°C). The intra-assay variation was 0.03°C for both sets of probes. Interassay variations were 0.29°C for QJ 3 BDE and QJ 4 BDE and 0.17°C for QJ 5 E and QJ 6 E. Some nonspecific binding of the probes was exposed in the melting curve analysis, but the Tm at which the probes dissociated from their noncomplementary targets was significantly lower (<59°C) than that at which they dissociated from the specific targets. The presence of the PCR amplification product was also confirmed by gel electrophoresis.
Real-time PCR combined with FRET hybridization probes proved to be a good alternative to sequencing for identification of the ptxS1 gene alleles of B. pertussis. The assay correctly identified all the PT gene variants. The assay is simple, rapid (it can be carried out within 2 h), and reliable. Further, the intra- and interassay variations in Tm were extremely low. The nonspecific binding of the probes was differentiated from the specific binding based on the Tm. The disadvantages of this method are that novel ptxS1 genotypes can be missed and the ptxS1 gene alleles of the two vaccine subtypes cannot be differentiated from each other.
The B. pertussis isolates harboring the ptxS1A allele are first differentiated from the strains harboring ptxS1B, ptxS1D, and ptxS1E. Although the probes did not give a signal for the PCR products derived from strains with the ptxS1A allele, specific amplification products were seen with all of the B. pertussis strains studied (confirmed by gel electrophoresis).
The frequency of B. pertussis strains harboring the vaccine type ptxS1B or ptxS1D allele is decreasing with time in countries with high vaccination coverage. In the United States, the frequency of strains with vaccine alleles was 36% in 1975 to 1987 and 22% in 1989 to 1999 (5). A similar frequency trend has been observed in The Netherlands (20). The method described here is suitable for typing of PT alleles of B. pertussis clinical isolates. Strains with the one of the vaccine type alleles, ptxS1B and ptxS1D, or with ptxS1E can be detected by running the two hybridization probe assays, and the results can be obtained within 2 h.
The Centers for Disease Control and Prevention have classified pertussis as one of the reemerging infectious diseases (6). The incidence of pertussis has increased in many countries with high vaccination coverage, such as Australia, Canada, France, The Netherlands, and the United States (1, 3, 4, 9). There are several explanations for the resurgence of pertussis in vaccinated populations, such as improved surveillance, more-sensitive diagnostic methods, waning vaccine-induced immunity, and the adaptation of the bacterial population to vaccine-induced immunity. In the countries where pertussis notification rates have increased, an antigenic drift in PT and PRN has been observed and the vaccine type strains have been replaced by the antigenic variants (5, 11, 12, 19, 20). In Finland, 100% of the clinical strains isolated in the 1990s harbor the ptxS1A allele, whereas the strains isolated before the 1970s exclusively harbor the vaccine type allele ptxS1B (19). Whether this drift is caused by long-term pertussis vaccination remains to be elucidated. It is important not only to monitor the situation in highly vaccinated populations but also to study the strains currently circulating in countries with low vaccination coverage. For large-scale screening of B. pertussis isolates, tools that are more rapid and less laborious than sequencing are needed. We have previously used LightCycler real-time PCR and hybridization probes for typing of B. pertussis PRN gene variants (16). This assay, together with the method described in this study, makes possible rapid identification of the gene variants of both PT and PRN, two important antigens of B. pertussis.
The Academy of Finland, the Special Governmental Fund for University Hospitals (EVO), and the European Commission Quality of Life Program (QLK2-CT-2001-01819) financially supported this work.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»