Previous Article | Next Article ![]()
Journal of Clinical Microbiology, July 2002, p. 2545-2554, Vol. 40, No. 7
0095-1137/02/$04.00+0 DOI: 10.1128/JCM.40.7.2545-2554.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Departamento de Microbiología Molecular, Centro de Investigaciones Biológicas, Consejo Superior de Investigaciones Científicas,1 Centro Nacional de Microbiología, Instituto de Salud Carlos III, Majadahonda, Madrid, Spain2
Received 16 January 2002/ Returned for modification 10 April 2002/ Accepted 27 April 2002
|
|
|---|
|
|
|---|
The characteristic Doc solubility is due to the triggering of the major pneumococcal autolysin (38). Pneumococcus possesses several murein hydrolases that split down different bonds in the peptidoglycan of the cell wall, and it has been proposed that these enzymes are present in practically all known bacterial systems. These ubiquitous enzymes play important biological roles in cell wall enlargement and degradation (49).
The major autolysin of S. pneumoniae, an N-acetylmuramoyl-L-alanine amidase (LytA) (25), was the first example of a bacterial autolytic enzyme characterized at the molecular level (18). This amidase exhibits a modular organization in which the amino-terminal domain functions as the catalytic region, whereas the carboxy-terminal domain (choline-binding domain) possesses a pair of six repeated motifs involved in recognition of the choline residues present in the cell wall teichoic acids (14). More recently, elucidation of the three-dimensional structure of the C-terminal domain has revealed the existence, at the end of LytA, of a highly divergent seventh motif (12). This modular arrangement has also been demonstrated for the lytic enzymes of pneumococcal phages (34), and its functionality was fully confirmed by the preparation of various active chimeric enzymes (4). A similar design was found later for different murein hydrolases isolated mainly from gram-positive bacteria (19). In the particular case of Staphylococcus aureus, it has been shown that a group of three motifs localized at the central part of a bifunctional murein hydrolase (Atl) anchor the protein to the equatorial region of the cell wall to control the separation of the daughter cell at the end of cell division (1).
In a previous report (6), we characterized the amidase of a clinical strain (101/87) that was isolated on the basis of hybridization with a lytA probe (pCE3) embracing the sequence coding for the N-terminal domain of the amidase (11). This isolate exhibited a Doc-insoluble phenotype, and in contrast to the LytA amidase from typical pneumococcal strains, Doc inhibited the enzymatic activity of the LytA101 amidase. We suggested that modifications in the primary structure or in the mechanisms that control the lytic activity of LytA might be responsible for the Doc-insoluble phenotype of this atypical pneumococcal strain (6).
The relevance of using the lytA gene as a specific pneumococcal identification tool is a subject of great controversy. Recent reports have envisaged that using lytA probes to identify difficult organisms as putative atypical pneumococci could also select other genetically related organisms such as Streptococcus mitis and Streptococcus oralis (22, 52). On the contrary, other investigations concluded that the lytA PCR amplification approach could be used to correctly differentiate S. pneumoniae from related species of the Streptococcus mitis group (30, 37).
To get insight into the Doc solubility defect of atypical pneumococci, we report here the characterization of several lytA alleles from a group of clinical isolates that exhibit aberrant reactions to Doc. The genetic and biochemical analyses of the amidases isolated from these strains and the constructions of chimeric proteins between these enzymes and the wild-type LytA from a typical pneumococcal strain provided insights into the molecular basis underlying the peculiar phenotype of these strains concerning a gene encoding an important virulence factor of S. pneumoniae (28). In addition, analyses of several housekeeping genes of the isolates reported here have been done to achieve a more accurate identification of these bacteria.
|
|
|---|
(23) served as the host for the expression vector pINIII-A3 (27). E. coli was grown in Luria-Bertani medium (44), and S. pneumoniae was grown in C medium (32) supplemented with yeast extract (0.8 mg/ml; Difco Laboratories) (C+Y medium). The procedures for genetic transformation of S. pneumoniae (45) and E. coli (44) have been described previously. |
View this table: [in a new window] |
TABLE 1. Some characteristics of the atypical (DocT- Lyt+) isolates used in this studya
|
PCR amplification, cloning, and nucleotide sequencing. Routine DNA manipulations were performed essentially as described before (44). DNA fragments were purified by using the Geneclean II kit (Bio 101). The relevant oligonucleotide primers used were LA_Sau5(1), 5'-cggGATCCTTCCTCTAGTTTCTAGC-3'; LA_Sau3(2376/c), 5'-cggGATCCGCTTTTCTTTCAGTTTC-3'; LA5_Ext(384), 5'-ggtctagAAGCTTTTTAGTCTGGGGTG-3'; LA3_Ext(1596/c), 5'-ggggatccAAGCTTTTTCAAGACCTAATAATATG-3'; MUTD1(1441), 5'-AGCGGACGGATGGTACTACC-3'; and MUTD2 (1466/c), 5'-GGTAGTACCATCCGTCCGCT-3'. Numbers in parentheses indicate the position of the first nucleotide of the primer in the sequence reported previously (18) (accession no. M13812), and c means that the sequence corresponds to the complementary strand. Lowercase letters indicate nucleotides introduced to construct appropriate restriction sites (shown in italics). We also used primers 63f and 1387r to amplify and sequence the 16S rRNA genes (36) and SOD-UP and SOD-DOWN for the sodA gene (30). Multilocus sequence typing (MLST) was carried out exactly as described elsewhere (7).
DNA sequence was determined by the dideoxy chain termination method (47) with an automated ABI Prism 3700 DNA sequencer (Applied Biosystems). All primers for PCR amplification and nucleotide sequencing were synthesized on a Beckman model Oligo 1000 M synthesizer.
Data analysis. Deduced amino acid sequences were analyzed with the Protein Analysis Tool at the World Wide Web molecular biology server of the Geneva University Hospital and the University of Geneva. Protein sequence similarity searches were done with the BLASTP program via the National Institute for Biotechnology Information server. Pairwise and multiple protein sequence alignment were done with the ALIGN and CLUSTAL W programs, respectively, at the Baylor College of Medicine Human Genome Center server (http://kiwi.imgen.bcm.edu:8088). DNA and protein sequences were also analyzed with the Genetics Computer Group software package (version 10.0) (3). Pairwise evolutionary distances (PEDs; estimated number of substitutions per 100 bases) were determined using the DISTANCES program with the correction adequate to each case. Multiple sequence alignments were created with PILEUP. Three-dimensional modeling of the C-terminal domain of the atypical LytA was carried out with the GENO3D program run at the Pole Bio-Informatique Lyonnais server (http://geno3d-pbil.ibcp.fr) using the crystal structure of the C-terminal domain of LytA (12) as a model.
Expression and purification of the amidases. E. coli recombinant strains were incubated in Luria-Bertani medium containing ampicillin (100 µg/ml). The culture was centrifuged (10,000 x g, 5 min), and the bacteria were resuspended in 20 mM sodium phosphate buffer (pH 6.8) and disrupted in a French cell press. The insoluble fraction was separated by centrifugation (15,000 x g, 15 min), and the supernatant was loaded into a DEAE-cellulose column to purify the amidases in a single step following a procedure described previously (46).
Miscellaneous techniques. Antibiotic susceptibility testing was performed following the agar dilution technique (10). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was carried out with the buffer system described by Laemmli (33) in 10 or 12.5% polyacrylamide gels, and protein bands were visualized by staining with Coomassie brilliant blue R250. Pneumococcal cell walls were radioactively labeled with [methyl-3H]choline as described (38). Assays for cell wall lytic (amidase) activity were carried out according to standard conditions described elsewhere using labeled cell walls as the substrate (25). One unit of amidase activity was defined as the amount of enzyme that catalyzed the hydrolysis (solubilization) of 1 µg of cell wall material in 10 min. Serogrouping was carried out by using specific antisera purchased from the Staten Seruminstitut (Copenhagen).
Nucleotide sequence accession numbers. The nucleotide sequences determined in this study have been deposited in the EMBL/GenBank/DDBJ databases. The lytA alleles have been assigned accession numbers AJ419973 to AJ419983, the sodA fragments are accession numbers AJ421532 to AJ421543, and the housekeeping gene fragments are accession numbers AJ422245 to AJ422287.
|
|
|---|
In agreement with this hypothesis, exponentially growing cultures of strains 782 and 1338 were subjected to the Doc assay in tubes but with decreasing amounts of the detergent. When 0.05 or 0.1% Doc was employed, the cultures of those strains lysed, whereas no lysis was observed at Doc concentrations of 0.5% or higher (data not shown). With any other atypical strain tested, lysis did not occur at any Doc concentration used. Interestingly, with the exception of strain 1078, a strain that shows very low autolytic activity (not shown), all the atypical pneumococci lysed when 1% Triton X-100 was used instead of Doc. In vitro experiments (not shown) demonstrated that, in contrast to the inhibitory effect of Doc, Triton X-100 stimulated the amidase activities of the atypical amidases.
Relationship between lytic phenotype and genetic background. In a previous report, we suggested that the failure of Doc to induce the lysis of the 101 strain was due to the presence of an atypical lytA allele (designated lytA101 hereafter) in this isolate (6). To further investigate the relationship between the lytA+ alleles characteristic of the typical pneumococcal strains, that is, those strains showing a DocT+ phenotype, from those alleles present in the DocT- isolates, we amplified by PCR the lytA gene from the strains shown in Table 1. Sequence comparison (Fig. 1) revealed that the atypical lytA alleles were quite different from the lytAR6 allele, i.e., the PEDs were higher than 20%. However, the lytA alleles from atypical isolates were more than 92% identical to each other. Besides, the alleles from strains 8224 and 11923 on one side and 1078, 1338, 10546, and 1508 on the other were more than 97.5% identical (PEDs lower than 2.5%). We can conclude from these data that the sequence similarities of the atypical LytA amidases with LytAR6 ranged from 84.5 to 86.7% identity (88.6 to 90.5% similarity), whereas identities higher than 93.7% were found when they were compared with the atypical amidases. When the lytA alleles were aligned, up to 247 nucleotide positions were found to be modified (Fig. 2). These mutations were evenly distributed over the entire gene, and no clear indication of mosaic structures could be observed. The most noticeable feature of the atypical alleles is the presence of a 6-bp deletion (ACAGGC), located between nucleotide positions 868 and 873, coding for Thr290-Gly291 in the P6 motif of the wild-type LytA amidase.
![]() View larger version (120K): [in a new window] |
FIG. 1. Pairwise comparison of the nucleotide sequences of the lytA alleles from atypical isolates and from strain R6. Above the diagonal, a matrix of PEDs between aligned sequences is shown. Below the diagonal, the percent nucleotide identity is shown. Black, gray, and white boxes indicate identities lower than 85% (PEDs higher than 20%), between 90 and 97.5% (PEDs between 8 and 5%), and higher than 97.5% (PEDs lower than 2.5%), respectively.
|
![]() View larger version (131K): [in a new window] |
FIG. 2. Sequence variation in atypical lytA alleles. Each of the sites where the sequence of one or more of the lytA alleles differs from that of the wild type (lytAR6) is shown. Hyphens and colons represent nucleotides identical to those of the lytAR6 and lytA101 alleles, respectively. Sites where all of the sequences are identical are not shown. Sites 1, 2, and 3 indicate the first, second, and third nucleotide, respectively, in the codon. The numbering of the codons corresponds to that in a previous publication (16). Gray and black boxes indicate nucleotide changes causing conserved and nonconserved amino acid substitutions, respectively.
|
|
View this table: [in a new window] |
TABLE 2. Specific activities and Doc sensitivities of purified LytA-like amidases
|
![]() View larger version (27K): [in a new window] |
FIG. 3. Schematic representation of the construction of chimeric genes between the lytA+ and lytA1338 alleles. The corresponding genes were PCR amplified with oligonucleotide primers LA5_Ext and LA3_Ext. The locations of the tandem promoters lppp-5 and lacpo in pINIII-A3 are shown. Abbreviations: bla, gene encoding ß-lactamase; B, BamHI; H, HincII; X, XbaI. The elements of the figure are not drawn at the same scale.
|
lytA mutation of the lytAR6 gene (lytA
6-R6) (Fig. 4). The resulting plasmid, pMVO1, harboring the mutant gene was used to overproduce in E. coli the deleted LytA enzyme (designated LytA
6-R6 hereafter). The purified amidase showed a specific activity of 910,000 U/mg, similar to that of the LytAR6 amidase (Table 2), but it was inhibited by 1% Doc and lost 30% of its enzymatic activity in the presence of the detergent (not shown). These results strongly suggested that sensitivity to Doc was influenced by the 6-bp deletion and that the low specific activity of the LytA-like amidases had to be ascribed to another mutation(s) in the corresponding genes. Nevertheless, we cannot discard the possibility that other mutations in the atypical isolates, e.g., cell wall alterations, might contribute to the atypical behavior of these strains when tested with Doc.
![]() View larger version (23K): [in a new window] |
FIG. 4. Construction of the expression vector pMVO1, encoding a 2-amino-acid deletion in the R6 amidase. The deleted motif is shown as a black box. The locations and directions of the oligonucleotide primers LA5_Ext (gray arrowhead), LA3_Ext (black arrowhead), MUTD1 (gray triangle), and MUTD2 (black triangle) are indicated. Abbreviations: B, BamHI; X, XbaI.
|
6-R6 allele into the R6 background. The R6 descendant strain M41 (lytA41) was employed as the recipient. This mutant has suffered a G-to-A transition at nucleotide 722 of the lytA gene, leading to the formation of a UAG stop codon (15) (Fig. 5). Consequently, M41 exhibits a DocT- DocF- phenotype. Competent M41 cells were transformed with pMVO1 (Fig. 4) and plated, and the colonies were tested for the DocF phenotype. Several DocF+ colonies were found, and one of them (strain MVO1) was isolated for further analysis. PCR amplification and sequencing of the lytAMVO1 gene demonstrated the presence of the 6-bp deletion. In addition, when MVO1 was subjected to the Doc tube test, it showed a DocT+ phenotype (not shown). Taken together, these results revealed that the 6-bp deletion, although causing the synthesis of an amidase that is inhibited in vitro by Doc, is not sufficient per se to produce either a DocT- or a DocF- phenotype.
![]() View larger version (45K): [in a new window] |
FIG. 5. Multiple alignment of a partial nucleotide sequence of the lytA alleles from transformants MVO2, MVO4, and MVO5. The nucleotide sequences of the lytA alleles from strains 1338 (donor) and M41 (recipient) are also shown. Hyphens indicate nucleotides identical to those of the lytAR6 allele. Gray, stippled, and hatched bars represent the regions of lytAMVO2, lytAMVO4, and lytAMVO5, respectively, where recombination took place during transformation. The location of the HincII site used for constructing lytAN1338 and lytAC1338 (see Fig. 3) is also shown.
|
To determine the biochemical properties of the new chimeric amidases, exponentially growing cultures of the corresponding pneumococcal transformants were disrupted in a French pressure cell, and amidase activity was assayed in the presence or in the absence of 1% Doc (not shown). As expected, LytAMVO4 and LytAMVO5 were fully active in the presence of the detergent, whereas LytAMVO2 and LytAMVO25 were inhibited by about 40%. These results allowed us to conclude that the lytA1338 allele was the single trait responsible for the DocT- DocF- phenotype of the atypical strain. Moreover, and according to the behavior of the chimeric LytA constructions, this phenotype can be ascribed to the cooperation of various mutations (including the 6-bp deletion) located at the C-terminal domain of the enzymes, as illustrated in the case of strain MVO2.
Phylogenetic position and genetic relatedness of atypical isolates. To determine the phylogenetic position of the atypical isolates, we amplified and determined a partial nucleotide sequence of the genes coding for the 16S rRNA (data not shown). Sequence comparison revealed more than 97% identity with the 16S rRNA genes of S. pneumoniae and S. mitis, whereas lower similarities were found with other species of the S. mitis group, indicating that all the atypical isolates belong to the S. mitis group of viridans streptococci (29) and that the atypical isolates were closely related to those two species.
Recent works (30, 41) have shown that variations in the sequence of the sodA gene, coding for the manganese-dependent superoxide dismutase enzyme (Mn-SOD), is a faithful marker to estimate the similarity between species of the S. mitis group. We amplified by PCR an internal portion (327 bp) of the sodA gene from the clinical isolates reported in this study, the laboratory R6 strain, and S. pneumoniaeT, S. mitisT, and S. oralisT (Fig. 6A). As expected, the sodA sequences from the four latter strains were identical to those reported previously (26, 30, 41). Interestingly, the sodA782 allele is identical to sodAR6 whereas all other alleles from atypical strains differed from those of R6, S. mitisT, or S. oralisT. The reason for this identity might be explained as the result of a single transformation event involving DNA from a typical pneumococcus into the 782 isolate, acting as the recipient. On the other hand, the sodA8224 and sodA11923 alleles were identical.
![]() View larger version (85K): [in a new window] |
FIG. 6. Sequence variation in sodA alleles. (A) Multiple alignment. Each of the sites where the sequence of one or more of the sodA alleles differs from that of the R6 strain is shown. Hyphens represent nucleotides identical to those of the sodAR6 allele. Sites where all of the sequences are identical are not shown. Sites 1, 2, and 3 indicate the first, second, and third nucleotide, respectively, in the codon. The numbering of the codons corresponds to that in a previous publication (53). Spn, Smi, and Sor indicate the sodA alleles from the type strains of S. pneumoniae, S. mitis, and S. oralis, respectively. (B) A matrix of PEDs between aligned sequences is shown. Numbers represent the estimated number of substitutions per 100 bases with no distance correction. Black boxes indicate comparisons with the sodA alleles from the type strains of S. pneumoniae (Spn), S. mitis (Smi), and S. oralis (Sor). The ranges of PEDs compared the atypical alleles with the sodA alleles included in the EMBL database (6 November 2001, last date accessed) and are shown in gray boxes. SPN, S. pneumoniae (26 entries); SMI, S. mitis (24 entries); SOR, S. oralis (40 entries).
|
To get further insight into the phylogenetic relationships of the atypical isolates, we used the MLST technique (7), and some housekeeping (neutral) genes were partly sequenced and compared to those included in the pneumococcal MLST web- site (http://mlst.net; 17 December 2001, last date accessed). This database currently contains the partial nucleotide sequences of seven housekeeping genes from over 600 S. pneumoniae isolates. Sequencing of the gki and xpt genes from the 12 atypical isolates revealed that all the alleles differed from those included in the MLST database and that those from strains 11923 and 8224 were identical (not shown). The additional five housekeeping genes (aroE, ddl, gdh, recP, and spi) were also sequenced in the latter two strains, showing identity in every case. However, these alleles differed from those of strain 1338.
These results, taken together, allowed us to conclude that, with the exception of strains 11923 and 8224, each atypical strain represents a different clone according to the nomenclature introduced by Feil and coworkers (8). When the PED values of the alleles of genes ddl, gdh, and spi from strains 11923/8224 and 1338 were compared with those of typical pneumococci, it was observed that they fit within the range calculated for typical alleles included in the MLST database (
10.66,
5.65, and
8.44%, respectively). However, the atypical isolates harbored gki and xpt housekeeping alleles with PED values ranging from 2.69 to 10.97% and 1.23 to 10.29%, respectively. Consequently, some of these values were higher than those found for typical pneumococci (PED values of
6.25 and
8.85%, respectively).
|
|
|---|
0.12 µg/ml), and some of them exhibited an extremely resistant phenotype (MIC = 8 µg/ml). In view of the currently recognized genetic interchange among streptococci (24) leading to the spreading of antibiotic resistance, in this work we studied 12 streptococcal isolates with different levels of resistance that were preliminarily classified as S. pneumoniae on the basis of reactivity with a lytA-specific probe (11). Some of these isolates harbor a serogroup 19 pneumococcal capsule, whereas others were nontypeable. In addition, seven isolates were optochin sensitive. Globally, all of these strains showed an altered autolytic system, as shown by the finding that none of them lysed with 1% Doc, which is a prominent characteristic of typical pneumococci.
Sequence determination of the amplified lytA gene from the atypical isolates demonstrated that, globally, the atypical lytA alleles showed PEDs of about 20% compared with the lytA gene from typical pneumococcal strains (Fig. 1). The atypical alleles also exhibited a remarkable polymorphism (Fig. 2), and high divergence values (PED
7%) were found compared with the atypical lytA alleles described here as a whole or with those reported previously by Whatmore et al. (52). This was somewhat unexpected, since only limited genetic variation (0.11 to 3.2%) is known to exist among otherwise unrelated S. pneumoniae isolates (51).
The construction of chimeric LytA amidases containing either the N- or C-terminal moieties of a LytA from an atypical isolate showed significant loss of specific activity in both cases (Fig. 3). Moreover, only the chimeric enzyme LytAC1338 was inhibited by Doc. In addition, Doc sensitivity could be specifically attributed to the 2-amino-acid deletion located at the P6 motif of the amidase, as demonstrated here (Fig. 4). Further evidence for this conclusion was obtained from the study of phenotypes and biochemical properties of the amidases from the transformant strains MVO2, MVO4, MVO5, and MVO25 (Fig. 5). A multiple alignment of the LytA sequences revealed noticeable changes at the P6 motif that appeared to be unique to the atypical alleles, that is, the 2-amino-acid deletion already mentioned and several nonconservative amino acid replacements (Fig. 7A). Molecular modeling predicted a profound alteration of the three-dimensional folding of the atypical P6 motif compared to that reported recently for the typical motif (12) (Fig. 7B). This explains why mutations at P6 strongly modify the biochemical properties of the amidase in the atypical LytA. It is interesting that the amidases Ejl and Pal, which are encoded, respectively, by the pneumococcal bacteriophages EJ-1 and Dp-1 and contain identical deletions, are also inhibited by Doc (5, 48).
![]() View larger version (55K): [in a new window] |
FIG. 7. Atypical LytA amidases contain a degenerate P6 motif. (A) Alignment of the C-terminal end of typical and atypical LytA amidases. The sequences of the bacterial LytA amidases were obtained from the EMBL database (10 December 2001, last date accessed). Eighteen typical and 19 atypical amidases, which include those reported here, were aligned by using PILEUP, and a consensus amino acid sequence of one enzyme of each class is shown. Colons indicate identical amino acid residues, and polymorphic residues are boxed. In the case of typical amidases, the consensus sequence contains amino acid residues present in at least 90% of the aligned enzymes, whereas a higher polymorphism was observed for atypical amidases. The corresponding accession numbers, positions, and changes in the atypical LytAs are: AJ252191, AJ252193, AJ419980, and AJ419981, 253G R; AJ419974 and AJ419975, 253G T; AJ252190, 253G A; AJ419978 and AJ419982, 271L P; S43511, 281N H; AJ419977, 282A V; AJ419978, 298T P; S43511, AJ252191, AJ252192, AJ252193, AJ419977, and AJ419981, 301E D; S43511, AJ252191, AJ252193, AJ419977, AJ419980, and AJ419981, 302K R; S43511 and AJ419977, 306/307TV SI; S43511 and AJ419977, 310E D; S43511, 315V M; AJ419976, 316K I; and AJ419974, 316K N. Choline-binding residues are indicated with a black triangle. The portions of the sequence that form the first and second strands of the hairpins are marked with an arrow. (B) Predicted three-dimensional folding of the P5 to P7 motifs of an typical LytA amidase lacking two amino acid residues (TG) at positions 290 to 291 (illustration 1) and of the corresponding consensus sequence from an atypical isolate (illustration 2). For simplicity, only the -carbon chains are shown. The blue lines correspond to the modified amidases, whereas the folding of a typical LytA enzyme that has been experimentally determined (12) is drawn in yellow. Three different rotations of the models are shown.
|
Previous and current findings taken together strongly suggest that very localized recombination events might have occurred between the wild-type lytA gene and other choline-binding enzymes, likely as the result of interchanges with genes carried by pneumococcal phages. An alternative possibility, though not mutually exclusive, is drawn by taking into account the well-documented presence of remnants of the lytA gene in various S. pneumoniae strains (34). These remnants could also provide an ideal background for site-specific recombination that would not affect the integrity of the lytA genes native to the host and the integrative phage HB-3 when a lysogenic situation is generated (42, 43). It has been suggested that localization of the bacterial attB close to these remnants may serve to incorporate the modified lytA genes when abnormal excisions of HB-3 take place (42). Later, this and possibly other phages might infect species closely related to pneumococcus that would incorporate these remodeled genes, which might provide evolutionary advantages to the new variants, into their genome.
An observation of potential practical interest is that the atypical pneumococci lysed when 1% Triton X-100 was used instead of Doc, because in contrast to the inhibitory effect of Doc, Triton X-100 stimulates amidase activity (6). This finding suggested that, for clinically relevant isolates showing a DocT- phenotype, the same test should be carried out with Triton X-100. This rapid, simple, and inexpensive assay would allow recognition of most of the atypical strains and their differentiation from closely related species such as S. mitis and S. oralis. The fact that the 1078 strain did not lyse with Triton X-100 suggests that a critical level of autolytic activity must be reached to induce cell lysis even in the presence of this detergent, and therefore, it is important to consider that some atypical pneumococci could still elude this test. However, a reasonable survey study should be performed to ensure that other nonpneumococcal streptococci are uniformly negative to the lytic action of Triton X-100.
It has been documented that pneumococcal strains that exhibit alterations in their lytic systems appear to contribute to higher morbidity and mortality during infection by playing a role in shaping the course of pneumococcal meningitis (50). The atypical strains studied here contain altered forms of LytA that make them refractory to the lytic effect of detergents, although they are still capable of autolysing at the stationary phase of culture (Lyt+ phenotype), at least under laboratory conditions. Obviously, the phenotypic variations induced by the LytA-like amidases studied here reflect an alteration in their lytic behavior that should influence the pathogenic properties of these strains compared with typical pneumococci and with other species of the S. mitis group. From the above data, we believe that the strains studied here are of pathogenic potential and might act as sources of DNA in recombination events generating new alleles under high selective pressure, e.g., antibiotic treatment, which means that they constitute a pool of variant DNAs.
The detailed molecular characterization of the atypical LytA autolysins, the 16S rRNA and the sodA sequencing, as well as the MLST analysis suggest that the strains studied here, although not typical pneumococcal strains, represent a quite diverse pool of organisms closely related to S. pneumoniae. It should be kept in mind that 16S rRNA sequences can be used routinely to distinguish and establish relationships between genera and well-resolved species (13). In this sense, sodA sequencing has contributed to a better identification at the species level among streptococci (41). However, in the particular case of streptococci belonging to the S. mitis group, it is very difficult to establish the strict limits between species, since the wide interchange of genetic information by different mechanisms of transformation and recombination (including infection by the same bacteriophages) that is facilitated by the possibility of sharing the same habitats may originate a panoply of strains with hybrid characteristics.
Finally, because the LytA amidase is an important pathogenic trait that may allow the strains to became adapted to different physiological circumstances and/or niches and because it shares with many other proteins a modular structure containing a common choline-binding domain, this enzyme provides an excellent reference system to follow its distribution and evolution within the S. mitis group of streptococci. In addition, this study can help not only to resolve diagnostic problems but also to understand the pathogenic potential of the different species of the S. mitis group. In fact, atypical pneumococci are indeed a heterogeneous population of related but not true pneumococci that may prove to be a new species.
We thank E. Cano and M. Carrasco for technical assistance.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»