Previous Article | Next Article ![]()
Journal of Clinical Microbiology, October 2004, p. 4850-4852, Vol. 42, No. 10
0095-1137/04/$08.00+0 DOI: 10.1128/JCM.42.10.4850-4852.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Wuhan Institute of Virology,1 Wuhan Institute of Hydrobiology, Chinese Academy of Sciences,2 Wuhan Tuberculosis Prevention and Cure Institute, Wuhan, People's Republic of China3
Received 23 March 2004/ Returned for modification 28 April 2004/ Accepted 8 June 2004
|
|
|---|
|
|
|---|
Rifampin was believed to target the RNA polymerase of M. tuberculosis and thereby kill the organism by interfering in the transcription process (13). More than 95% of rifampin-resistant (Rifr) M. tuberculosis strains carry mutations in an 81-bp rifampin resistance-determining region (RRDR) in the rpoB gene (9, 14, 15), making it a good target for molecular diagnosis.
Early diagnosis of TB and rapid testing of rifampin resistance are important to efficient treatment and control of drug-resistant TB. Conventional culture-based methods for drug susceptibility testing usually take more than 1 month. To detect drug-resistant M. tuberculosis strains more rapidly, methods based on molecular diagnosis have been developed (3, 7, 12, 14, 17), with which drug resistance detection could be completed in 1 day or in hours.
In a previous study, we designed a DNA chip using the principle of an oligonucleotide ligation assay for multiplex detection of single-nucleotide polymorphism (4). Based on this approach, here we report a new protocol, short-oligonucleotide-ligation assay on chip (SOLAC), for multiplex detection of DNA mutations in rifampin-resistant M. tuberculosis. The method needs only four biotin-labeled common probes to detect 15 mutational variants in the RRDR of the rpoB gene. Another advantage of the method is that the discrimination result is visualized directly through enzyme-linked assay. The method was evaluated by using a panel of M. tuberculosis isolates obtained from local clinical patients in Wuhan who were suspected of infection with rifampin-resistant M. tuberculosis.
M. tuberculosis strains and drug susceptibility test. The 60 M. tuberculosis isolates were recovered from 60 unrelated patients with newly diagnosed pulmonary TB. They originated from the Wuhan region of China and were admitted to the hospitals of the Wuhan Tuberculosis Prevention and Cure Institute between 1998 and 2003. Species identification of the isolates was based on standard microbiological tests: colony morphology, acid-fast staining, and biochemical tests (18, 19). All clinical isolates were grown on Löwenstein-Jensen medium. Rifampin resistance tests were performed by the absolute concentration method described previously (10).
Preparation of DNA samples from M. tuberculosis cultures and PCR amplification. DNA from cultured cells was extracted as described previously (11). Two-milliliter aliquots of clear supernatant were used for PCR. A 130-bp segment of the rpoB gene that contains the RRDR region was amplified by PCR (forward primer, 5'-GCCGCGATCAAGGAGTTCTTC-3'; reverse primer, 5'-GCACGTTCACGTGACAGACC-3'). The amplification was carried out as follows: 5 min at 94°C; 30 cycles of 45 s at 94°C, 45 s at 57°C, 30 s at 72°C; and 5 min at 72°C. The PCR products were purified with E.N.Z.A cycle-pure kits purchased from Omega Bio-tek (Doraville, Ga.).
Oligonucleotide design and chip preparation. Twenty-five oligonucleotides were designed (Table 1), including four common (Com) probes, three extra (Ex) probes, and 18 allele-specific (A) probes. They were divided into three groups (groups 16, 26, and 31). DNA chips were prepared as described previously (4).
|
View this table: [in a new window] |
TABLE 1. Probes designed to detect mutations in the rpoB gene
|
DNA sequencing of the rpoB gene. A 442-bp fragment including the RRDR region of the rpoB gene was sequenced after PCR amplification in order to analyze the mutations associated with rifampin resistance. The PCR was performed by using another pair of primers: forward primer, 5'-CAGACCACGATGACCGTTCC-3'; reverse primer, 5'-GAGCCGATCAGACCGATGTT-3'. The amplification products were directly sequenced by Shanghai CASarray Co., Ltd.
The optimal ligation temperatures of short allele-specific oligonucleotides cannot be estimated by biological analysis software. To optimize the reaction temperature for multiplex ligation, three common mutants (with 516GAC
GTC, 526CAC
TAC, and 531TCG
TTG substitutions) were constructed. In addition, DNA samples from 15 Rifr strains with known sequences (obtained from Wuhan Tuberculosis Prevention and Cure Institute) were also used in the optimization process. The G+C content of the nucleotides, the length of allele-specific oligonucleotides, and the length of the common probes were the main factors being adjusted in optimization. After optimization, the allele-specific probes were divided into three groups according to their optimal ligation temperatures.
A total of 25 probes were designed, including 18 allele-specific short oligonucleotides, four common probes, and three extra probes. In a previous study, we found that sometimes extra probes were needed to enhance ligation efficiency (4). The three extra probes were designed for this purpose. The 18 allele-specific probes were covalently immobilized on the glass slides to form DNA chips, with which 15 mutational variants of the rpoB gene could be detected within 12 h. These variants are found in nearly 85% of all mutants whose rifampin resistance is caused by mutations in the RRDR of the rpoB gene. The 130-bp PCR products from 60 clinical isolates of M. tuberculosis, 55 known to be rifampin resistant and 5 known to be rifampin sensitive, were scanned for mutations by the SOLAC assay. Among the 55 rifampin-resistant isolates, 47 were found to harbor point mutations belonging to seven types (Fig. 1). In addition, a deletion mutation in one isolate was also found by this method (data not shown). Subsequent DNA sequencing of the RRDR in the rpoB gene confirmed mutations within these isolates (Table 2). Thus, the accuracy of the SOLAC assay was 87.3% (48 of 55), and the concordance between the SOLAC results and those of DNA sequencing was 83.6% (46 of 55). No mutations were found in six rifampin-sensitive isolates, including H37Rv, by SOLAC; the results were fully concordant with those of DNA sequencing.
![]() View larger version (94K): [in a new window] |
FIG. 1. Multiplex detection of point mutations in codon 526 of the rpoB gene in rifampin-resistant M. tuberculosis. (A) Probes 526Wt, 526A1, 526A2, 526A3, 526A4, 526A5, 526A6, and 526A7 were immobilized onto loci 1, 2, 3, 4, 5, 6, 7, and 8, respectively. Mutations in codon 526 of the rpoB gene in four rifampin-resistant M. tuberculosis clinical isolates (1, 8, 13, and 54) were detected at four separate arrays (A, B, C, and D). Reactions were performed at 30°C for 2 h. No mutation in codon 526 was found in one isolate, and three substitutions in codon 526 (C T, C G, and A G) were detected in the other three isolates (B, C, and D, respectively). All the results were verified by DNA sequencing.
|
|
View this table: [in a new window] |
TABLE 2. Detection of rpoB gene mutations of M. tuberculosis in Wuhan by SOLAC compared with DNA sequencing results
|
In spite of its limitations, the SOLAC assay obviously has a number of advantages. First, the ligation condition is nonstringent, enabling the typing of multiple nucleotide substitutions in a single assay yet requiring specificity at the site of interest. Second, the assay is highly adaptable: additional oligonucleotides can be easily incorporated to detect more mutations in the target DNA. Third, the SOLAC method needs much less common probe than the conventional oligonucleotide ligation assay in detection of multiple DNA mutations. This feature further facilitates multiplex detection of DNA mismatches in a single reaction in combination with DNA chips. Furthermore, this assay is simple to perform and interpret and does not require expensive equipment or technical expertise. Finally, either enzyme labeling or fluorescent labeling can be incorporated into the common probes to generate positive signals, allowing the sensitive and automatic scanning of a large number of clinical samples with or without specific equipment.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»