Previous Article | Next Article ![]()
Journal of Clinical Microbiology, December 2004, p. 5462-5466, Vol. 42, No. 12
0095-1137/04/$08.00+0 DOI: 10.1128/JCM.42.12.5462-5466.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Department of Microbiology, Aichi Prefectural Institute of Public Health, Nagoya, Aichi, Japan
Received 7 May 2004/ Returned for modification 14 July 2004/ Accepted 13 August 2004
|
|
|---|
|
|
|---|
The genomes of most bacteria contain distinct classes of insertion sequences (IS). IS typing involves utilizing the diversity of insertion sites. For some bacterial species, IS typing can be utilized for genotyping methods other than PFGE. For Mycobacterium tuberculosis, restriction fragment length polymorphism (RFLP) analysis using the sequence IS6110 is a standard genotyping method (12, 18). This method is time-consuming because it is a standard Southern blotting-based technique. Several studies have investigated genotyping methods using PCR with insertion sequence primers. Otal et al. (13) reported on an IS6110-based PCR method using single outward-facing primers for IS6110 that is comparable to standardized IS6110 RFLP analysis methods. IS typing by PCR has also been developed for STEC O157. Thompson et al. (17) reported that the band patterns yielded by IS3 typing for E. coli using outward-facing primers are not as variable as those produced by PFGE.
STEC O157 contains the IS1203 sequence in addition to IS3. IS1203 was reported by Paton and Paton (14) for the E. coli O111:H strain PH. IS1203 is a 1,312-nucleotide sequence with imperfect 26-bp terminal inverted repeats and is closely related to the IS629 sequence of Shigella sonnei (10) and IS3411 of E. coli (4). At least 12 copies of IS1203 have been found in the genome of the E. coli O111:H strain PH (14). IS1203 sequences were found in the genome sequence data of STEC O157 EDL933 (accession no. NC_002655) (12 copies) and of the Sakai strain (accession no. NC_002695) (19 copies). IS1203 was also found in the stx1 and stx2 genes of STEC O157 (8, 15) and in phage carrying stx2 (6).
In this study, we developed a genotyping method using IS1203 (referred to here as IS1203 PCR typing) which is similar to the IS6110-inverse-PCR method developed by Otal et al. (13). We attempted to create a rapid and reproducible PCR genotyping protocol using ligation and nested PCR.
|
|
|---|
PFGE.
PFGE was performed as described elsewhere (1), with minor modifications. In brief, bacterial cells cultured in Luria-Bertani (LB) broth at 37°C overnight with shaking were directly embedded in low-melting-temperature agarose (Nippon Gene, Tokyo, Japan). After appropriate preparations for restriction endonuclease digestion were made, the DNA in each plug was digested with 30 U of XbaI (Roche Diagnostics, Mannheim, Germany) at 37°C overnight. PFGE was performed on a 1% agarose gel by using a Gene Navigator system (Pharmacia Biotech AB, Uppsala, Sweden) in 0.5x Tris-borate-EDTA buffer at 200 V. For whole-genome separation, linearly ramped switching times from 1 to 40 s were applied for 22 h.
DNA concatemers (Bio-Rad Laboratories, Hercules, Calif.) were used as size markers, and the gels were visualized by ethidium bromide staining and photographed under a transilluminator. The patterns were analyzed with FingerPrinting II software (version 4.2; Bio-Rad Laboratories). A dendrogram was drawn from this data by the unweighted pair group method with arithmetic averages (UPGMA), and similarity coefficients were calculated by the Jaccard method. PFGE patterns were sorted by FingerPrinting II and visually compared by using the criteria of Tenover et al. (16). Major strain types were designated by letters, with numbers added for subtypes.
IS1203 PCR typing. A schematic drawing of IS1203 PCR typing is shown in Fig. 1. Strains were cultured in LB broth at 37°C overnight with shaking, and chromosomal DNA was purified by using a DNeasy tissue kit (QIAGEN, Hilden, Germany) according to the manufacturer's instructions. Five hundred nanograms of purified DNA was digested by 10 U of the PvuII restriction enzyme (Roche Diagnostics) for 1 h at 37°C. The digested DNA was purified by phenol extraction and ethanol precipitation and was then dissolved in 500 µl of distilled water. As IS1203 was digested by PvuII at one site (Fig. 1a), each of the digested fragments contained an upstream or a downstream region of IS1203. To detect fragments containing IS1203, digested DNA fragments were self-ligated by using a Rapid DNA Ligation kit (Roche Diagnostics). Ligation was performed in a total volume of 10 µl containing 2 to 4 ng of digested DNA for 30 min at 20°C. The self-ligated DNA was detected by PCR using primer pair 1203-82 (5'-CAC GTT CCA GCT CTT TCA G-3') and 1203-11 (5'-GAC TGG CTG AAG AGA GAG AT-3') for fragments containing the upstream region of IS1203 (upstream typing), and primer pair 1203-62 (5'-TAA ACG CCA CAT AGA CGA AGC C-3') and 1203-31 (5'-GTA TGA CAA CGC GAT GGC T-3') for fragments containing the downstream region (downstream typing). PCR was performed in a volume of 25 µl containing 2.5 µl of ligated DNA, EX-Taq buffer, deoxynucleoside triphosphates, 0.2 µM each primer, and 1 U of EX-Taq (Takara Bio, Ohtsu, Japan). PCR cycles consisted of 94°C for 1 min, 55°C for 45 s, and 72°C for 1 min, and PCR was performed for 20 cycles by using a GeneAmp PCR system 9600 (Applied Biosystems Japan, Tokyo, Japan).
![]() View larger version (17K): [in a new window] |
FIG. 1. Schematic diagram of IS1203 PCR typing. (a) IS1203 sequences were divided into two fragments, the upstream (open box) and downstream (solid box) fragments, by PvuII digestion between nucleotides 1032 and 1033 (arrowhead). Arrows indicate the primer regions for upstream typing (1203-82 and 1203-11 for first PCR, and 1203-72 and 1203-21 for nested PCR) and downstream typing (1203-62 and 1203-31 for first PCR, and 1203-52 and 1203-41 for nested PCR). (b) Detection of PvuII-digested fragments containing IS1203. STEC O157 genomic DNA contains more than 10 copies of IS1203 (two copies of IS1203 are shown in the figure for simplicity). Open box, IS1203 upstream region; solid box, downstream region. STEC O157 genomic DNA was digested at the PvuII recognition sites (arrowheads). Digested fragments were then self-ligated. Ligated fragments containing IS1203 were amplified by PCR in the direction of the arrows. Fragments containing upstream or downstream regions of IS1203 were reacted. Nested PCR was performed for accuracy, and two electrophoresis patterns (upstream and downstream patterns) were obtained from one strain.
|
IS1203 PCR type names were assigned as follows. Clusters with more than 30% similarity were given Greek letters, from
to
; subclusters with more than 60% similarity were designated by Roman numerals within the same cluster; and IS1203 PCR patterns with 1 or 2 differences in the bands had Arabic numerals added. Clusters or subclusters without subdivisions were not given a lower class name. Seven randomly selected strains, including two strains with the same PFGE pattern, were used to test for reproducibility. The reproducibility tests were performed under the same conditions three times.
Statistical analysis. The numerical index of discrimination (D index) for IS1203 PCR typing and PFGE, defined as the average probability that different genotyping was assigned to two unrelated strains in a population of a given genus, was calculated by the method of Hunter and Gaston (3).
|
|
|---|
![]() View larger version (50K): [in a new window] |
FIG. 2. A dendrogram based on PFGE patterns was drawn by using UPGMA. PFGE patterns are also shown. Shiga toxin-producing types and PFGE types are shown in the Stx and PFGE type columns. Superscript numbers or letters following strain designations indicate origins, as follows: #1 through #9, strains isolated from outbreaks; S, strain isolated from the Sakai outbreak; C, strains isolated from cattle stool.
|
![]() View larger version (120K): [in a new window] |
FIG. 3. Electrophoresis patterns of IS1203 PCR typing repeated three times. Electrophoresis patterns under 1.2 kbp were the same for all strains. Large fragments had a tendency to be unstable (downstream typing, strains 2-051 and 0-536).
|
One to nine bands under 1.2 kbp were detected by downstream typing, but two strains exhibited no band. Seventy-seven strains which exhibited more than one band were classified into 27 downstream types. Seventeen of these 77 strains were classified into 10 types with one-to-one correspondence to PFGE. The other 60 strains, which were classified into 17 downstream types, were divided into 24 subtypes by PFGE. The D index was 0.952 for downstream typing.
Based on the composite data set that combined the fingerprinting patterns of upstream and downstream typing, 79 strains were classified into 39 types (Fig. 4). IS1203 PCR types were divided into four major clusters (clusters
to
) and three independent types (
,
, and
). Forty-one strains exhibited 25 patterns with one-to-one correspondence to PFGE (Fig. 4). Another 17 strains were classified into 12 types by IS1203 PCR typing and into 6 types by PFGE (Table 1). Some strains with the same PFGE type had IS1203 PCR types in different clusters: two strains with PFGE type U2 were classified as
-II-2 and
, respectively, and two strains with PFGE type D were classified as
-I-1 and
-II, respectively. Finally, 21 strains were classified into two types by IS1203 PCR typing and into six subtypes by PFGE (Table 2). Seven strains of one IS1203 PCR type (ß-I-5) were classified into four major PFGE types. Strains collected from the same outbreak had the same IS1203 PCR type. The D index was 0.974 for IS1203 PCR typing with composite data sets.
![]() View larger version (60K): [in a new window] |
FIG. 4. A dendrogram was drawn by using a composite data set of upstream and downstream patterns obtained from IS1203 PCR typing by UPGMA. The electrophoresis patterns of upstream anddownstream typing are also shown. The patterns were divided into four major clusters (clusters to ) and three independent types. Pattern designations obtained from composite IS1203 PCR typing data and from PFGE are shown in the respective columns. IS1203 PCR types exhibiting one-to-one correspondence with the PFGE subtypes are asterisked. Superscript numbers or letters following strain designations indicate origins, as follows: #1 through #9, strains isolated from outbreaks; S, strain isolated from the Sakai outbreak; C, strains isolated from cattle stool.
|
|
View this table: [in a new window] |
TABLE 1. IS1203 PCR types with the same PFGE pattern
|
|
View this table: [in a new window] |
TABLE 2. IS1203 PCR types with different PFGE patterns
|
|
|
|---|
In this study, we developed an IS-typing PCR method that utilizes and is similar to the IS6110-inverse-PCR method developed by Otal et al. (13), which involves IS typing using digestion with the restriction endonuclease PstI, ligation, and PCR. Although Otal et al. expected more bands by IS6110-inverse PCR, the number of bands was not higher than that obtained by IS6110 PCR typing without the ligation step. The fragment size produced in standard RFLP analysis with IS6110 by PstI digestion is greater than 1 kbp (12). We hypothesized that the fragments should be short enough to be amplified by PCR. Prolonging the PCR extension step was not effective for amplifying large fragments (data not shown). The advantages of this protocol are as follows. First, to increase the discriminatory power of IS1203 PCR typing, PvuII digestion and ligation were performed. As IS1203 was cut at one site by PvuII, we obtained two fingerprint patterns containing the upstream and downstream regions of IS1203, respectively. This produced characteristic patterns for each strain, and the combination of these patterns increases the discriminatory power of IS1203 PCR typing. In addition, the fragments were short enough to facilitate PCR amplification (the expected length was less than 1 kbp in about one-third of the bands generated from the Sakai strain), and we could obtain stable bands. Second, we acquired reproducible results, because ligation and nested PCR minimized nonspecific bands under 1.2 kbp. We observed that some amplicons in the first PCR disappeared from nested-PCR products (data not shown). This suggested that some nonspecific reaction(s) occurred in the first PCR and that such nonspecific bands could be removed by the second PCR. We expected that minimization of nonspecific bands would improve reproducibility. Therefore, we performed nested PCR to obtain reproducible results. Although we could obtain reproducible results for most strains, further interlaboratory reproducibility studies are required.
Concerning the discriminatory power of IS1203 PCR typing, PFGE identified 36 different subtypes and IS1203 PCR typing identified 39. Thompson et al. (17) developed a subtyping method based on PCR amplification of variable DNA sequences between the repetitive IS3 elements of STEC O157 and reported that PFGE identified 25 different subtypes and IS3-based PCR identified 15. IS1203 PCR typing allows for higher discriminatory power than IS3-based PCR. The D index (0.974) for IS1203 PCR typing was slightly lower than that for PFGE (0.981) in this study, suggesting that the discriminatory power of our method is slightly lower than that of PFGE. However, the D index (0.974) indicates that if two strains from a population are randomly sampled, 97.4% of the time they will belong to different types (3). We believe that most strains can be identified by IS1203 PCR typing.
IS1203 PCR typing is an easy and rapid genotyping method with a sensitivity similar to that of PFGE. This method can be used to screen STEC O157 isolates.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»