Previous Article | Next Article ![]()
Journal of Clinical Microbiology, May 2004, p. 2134-2143, Vol. 42, No. 5
0095-1137/04/$08.00+0 DOI: 10.1128/JCM.42.5.2134-2143.2004
Center for Food Safety and Applied Nutrition, Food and Drug Administration, College Park, Maryland,1 Center for Biologics Evaluation and Research, Food and Drug Administration, Rockville, Maryland2
Received 18 November 2003/ Returned for modification 31 December 2003/ Accepted 9 January 2004
|
|
|---|
|
|
|---|
SEs belongs to a protein family called superantigens, which induce a polyclonal immune response by direct binding to class II major histocompatibility complex proteins and T-cell receptors on the surfaces of B and T cells without being internalized and processed like a normal antigen (3, 15, 28). These toxins may be involved in modulating the host immune response and may contribute to evasion of host defenses and bacterial persistence (12). Expression of specific enterotoxin (ent) genes by Staphylococcus aureus depends on the host tissue source and may play a role in the adaptation of S. aureus to the host environment (4).
There are 17 known major types of SEs (SEA to SER, respectively, with no SEF), and multiple SEs are commonly found among S. aureus strains (19, 20, 32). Many of the known staphylococcal enterotoxins (SEK to SER) were discovered recently.
The traditional method of identifying SEs by serological typing is relatively complex and time-consuming and is impractical for the detection and identification of a large group of related toxins with significant antigenic similarities (23, 24). Furthermore, the concentrations of toxins produced by S. aureus strains differ when the strains are grown on various natural substrates and laboratory media (7, 33). Other techniques have been used to identify toxin genotypes, including DNA-DNA hybridization and PCR, but these protocols were designed to detect only one or a few toxin genes (21, 35). Multiplex PCR for detection of several ent genes has been reported (6, 26, 29, 30, 36), but additional restriction endonuclease assays or other steps are required to ensure unambiguous identification of ent-specific amplicons. Therefore, there is still a need for a rapid and specific method for simultaneous detection and identification of SEs for diagnostic and epidemiological purposes.
Here we describe a rapid and reliable one-tube microarray-based assay for simultaneous detection and identification (genetic typing) of almost all known ent genes. The method includes PCR amplification of part of the ent genes with universal primers, followed by analysis of amplicons by hybridization with ent-specific oligonucleotide probes immobilized on the microchip.
|
|
|---|
Total DNA preparation. DNA was extracted from freshly grown cells by phenol-chloroform extraction (34). The presence, concentration, and purity of genomic DNA in the prepared samples were detected by measuring the absorbances at 260 and 280 nm with an Ultraspec 3000 spectrophotometer (Pharmacia, Peapack, N.J.).
PCR amplification. Table 1 lists the primers used to amplify different S. aureus enterotoxin genes. Specific primers were used for amplification of individual enterotoxin genes. The standard PCR mixture (30 µl) contained 1.5 U of HotStar Taq DNA polymerase, 1x buffer supplemented with 2.0 mM MgCl2 (Qiagen, Valencia, Calif.), 200 nM each forward and reverse primers, 200 µM each deoxynucleoside triphosphate (dNTP; dATP, dGTP, dCTP, and dTTP), and 100 to 300 ng of DNA template. PCR was performed with a Gene AMP PCR system 9600 thermocycler (Applied Biosystems, Foster City, Calif.) with the following cycle conditions: initial activation at 95°C for 15 min; 40 cycles at 94°C for 30 s, 55°C for 40 s, and 72°C for 60 s; and a final extension at 72°C for 7 min. The presence of amplified PCR products was detected by 2% agarose gel electrophoresis in 1x Tris-acetate-EDTA or Tris-borate-EDTA buffer. The gels were stained with ethidium bromide and photographed under UV light with a digital camera (EDAS 290; Kodak, Rochester, N.Y.).
|
View this table: [in a new window] |
TABLE 1. Primers used for amplification of S. aureus ent genes
|
Synthesis of ssDNA. Single-stranded DNA (ssDNA) samples were synthesized by use of a primer extension (PE) reaction in the presence of only the reverse primer. The standard mixture (50 µl) for PE with enterotoxin gene-specific primers contained 3 U of Taq DNA polymerase (Sigma, St. Louis, Mo.), 1x PCR buffer, 200 nM the corresponding reverse primer, 200 µM each dNTP, and 300 to 500 ng of the amplicon obtained during the previous PCR step. PE reactions were performed with a Gene AMP PCR system 9600 thermocycler (Applied Biosystems) with the following temperature conditions: initial denaturing of DNA at 94°C for 2 min, followed by 40 cycles each of 94°C for 30 s, 52°C for 40 s, and 72°C for 1 min and a final extension at 72°C for 7 min.
The PE reaction mixture for multiple ent genes with a universal reverse primer (700 nM) and seh reverse primer (50 nM) was the same as described above, except that the amount of DNA template (PCR amplicons) was increased to 800 ng to 1 µg. The cycling conditions were the following: initial activation of the enzyme at 95°C for 15 min; 40 cycles at 94°C for 30 s, 45°C for 40 s, and 72°C for 60 s; and a final extension at 72°C for 7 min. The ssDNA was purified with a Qiaquick PCR purification kit (Qiagen) and dried under vacuum.
Chemical labeling of ssDNA.
The dry ssDNA was reconstituted in 20 µl of water and chemically labeled with a fluorescent dye (cyanine 5 [Cy5]) with a MicroMax labeling kit (Perkin-Elmer, Boston, Mass.), according to the protocol of the manufacturer. Nonincorporated dye was removed from the DNA by purification through Centrisep columns (Princeton Separations, Adelphia, N.J.). The amount of the Cy5 dye incorporated into ssDNA was monitored by measuring the ratio of the absorbance at 649 to the absorbance at 260 nm. The typical ratio of
649/
260 was about 0.15 to 0.25, which corresponds to 1.5 to 3 dye moieties per 100 nucleotides of ssDNA.
Design of PCR primers and enterotoxin gene-specific microarray oligonucleotide probes. Searches with the BLAST program were used to find and retrieve the sequences of the available ent genes. The retrieved sequences were aligned by using ClustalX software (37). Sequences of highly conserved regions among all alleles of each ent gene were selected to design toxin-specific primers for accurate detection and identification of each target toxin gene. Toxin-specific oligonucleotide probes were designed by using highly conserved regions for alleles of each ent gene within the region flanked by primers. The oligonucleotides selected are summarized in Table 2. The 5' end of the amino acid sequence of each oligonucleotide probe was modified during the synthesis (Qiagen) to enable the immobilization of the oligonucleotide to silylated (aldehyde) slides (ArrayIt, Sunnyvale, Calif.).
|
View this table: [in a new window] |
TABLE 2. Oligonucleotide probes for detection and discrimination among ent genes
|
Microchips were printed by use of a contact microspotting robotic system (PIXSYS 5500; Cartesian Technologies, Inc., Irvine, Calif.). The average size of the spots was 250 µm. The concentrations of the oligonucleotide probes were adjusted to 100 µM in 50% dimethyl sulfoxide before they were printed on the slides. A quality control oligonucleotide probe (39) of nonbacterial origin was added to each oligonucleotide probe at a concentration of 10 µM to enable monitoring of the spotting and hybridization steps of the microarray assay. Printed slides were incubated for at least 10 min at 85°C to evaporate the dimethyl sulfoxide completely, followed by 15 min of incubation in a freshly prepared 0.25% NaBH4 solution in water. The slides were washed once for 5 min with 0.1% sodium dodecyl sulfate in water and five times for 1 min each time with distilled water to remove unbound oligonucleotides. Control spots used to mark the array position on the slide were generated by using 1x Spotting Solution (ArrayIt) in 0.25 M acetic acid.
Hybridization conditions. Hybridization of the fluorescently labeled DNA samples to the microarray was performed in 1x hybridization buffer (5x Denhardt's solution, 6x SSC buffer [1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate], 0.1% Tween 20) at 45°C for 45 min. Before hybridization, 2 to 3 µl of Cy5-labeled DNA sample was mixed with an equal volume of 2x hybridization buffer containing 0.1 µM Cy3 quality control probe, followed by denaturation at 95°C for 3 min and chilling on ice. Each sample was placed on the microchip and covered with a glass coverslip (6 by 15 mm) to prevent evaporation of the probe during incubation. After the hybridization, the coverslips were washed away with 6x SSC containing 0.2% Tween 20 at room temperature. The slides were washed in a stepwise manner with 6x SSC buffer, 2x SSC buffer, and 1x SSC buffer for 2 min each and dried by airflow.
Microarray scanning. Fluorescent images of the microarrays were taken by scanning the slides with a ScanArray 5000 instrument (Perkin-Elmer). The fluorescent signals from each spot were measured and compared by using QuantArray software (Perkin-Elmer).
Sequencing. We sequenced some enterotoxin genes, including seb, sed, see, and seq. The PCR-amplified DNA fragments were purified by agarose gel electrophoresis, extracted with a QIAquick gel extraction kit (Qiagen) according to the protocol of the manufacturer, and sequenced with an ABI Prism 310 Genetic Analyzer System (PE Applied Biosystems, Foster City, Calif.).
Nucleotide sequence accession numbers. The accession numbers of the sequences deposited in GenBank are AY518386 for seb of strain ATCC 14458, AY518387 for sed of strain NTCC10656, AY518772 for sem of strain ATCC 19095, and AY518388 and AY518389 for see and seq of strain ATCC 27664, respectively.
|
|
|---|
To develop toxin-specific PCR primers and microarray oligonucleotide probes, we performed multiple-sequence alignment analysis of the ent genes using sequence data from GenBank. As shown in Fig. 1, the analysis identified conserved regions flanking variable regions. The conserved regions were used to design universal primers for simultaneous amplification of multiple ent genes. The genetically divergent regions were used to design individual PCR primers specific for each ent gene and to design gene-specific oligonucleotide probes to discriminate among the 16 ent genes (Fig. 1).
![]() View larger version (55K): [in a new window] |
FIG. 1. Multiple-sequence alignment analysis of ent genes. The DNA sequences of 16 major SEs were retrieved from GenBank and aligned by using ClustalX software. The alignment results were presented by using GeneDoc software. Relatively conserved regions that were used for universal primer design are marked with arrows. The sequences of the oligonucleotide probes used for discrimination of the ent genes were selected from within the variable region flanked by the conserved regions. Gray background indicates similar sequences, and black background indicates conserved sequences.
|
For the amplification of each ent gene, gene-specific primers were selected on the basis of unique sequences common to all alleles of each toxin gene determined by the multiple-sequence alignment (Fig. 1). To minimize cross-amplification between different toxin genes, the primers selected contained five and more mismatches with homologous toxins. However, in the case of s, we decided not to develop allele-specific oligonucleotide probes for the three described alleles, s, sec1, and sec2, because of their sequence similarities. In the assay, all three are treated as a single gene, the s gene.
To design the oligonucleotide probes for the microarray, toxin-specific sequences were selected from the variable region identified by the multiple-sequence alignment (Fig. 1). Four individual oligonucleotide probes (21 to 30 nucleotides in length, with an average melting temperature of 50°C) were designed to represent the sequence of each target ent gene (Table 2). To minimize cross-hybridization with other ent genes, oligonucleotide probes whose sequences had at least three mismatches with the sequence of the genetically closest ent genes were selected.
Microarray analysis of ent genes in reference strains. For validation of the selected gene-specific primers and oligonucleotide probes, we used three well-characterized S. aureus sequencing strains, N315, MU50 (22), and MW2 (2), which contain most of the known staphylococcal toxin genes (sea, s, seg, seh, sei, sek, sel, sem, sen, seo, and sep). For the four toxins not coded for by these strains, we used three additional reference strains: ATCC 14458 for seb, NTCC10656 for sed and sej, and ATCC 27664 for see and seq.
Genomic DNA from the five reference strains (N315, MW2, ATCC 14458, NTCC10656, and ATCC 27664) was amplified with the ent-specific primers. The sizes of the PCR products generated with ent-specific primers varied from 466 to 807 bp, depending on the ent gene (Fig. 2A to C), and there was good agreement between the observed and the predicted sizes of the amplicons. We unambiguously identified the presence of all 16 toxin genes previously shown in these strains: the toxin genes s, seg, sei, sel, sem, sen, seo, and sep were found in strain N315 (Fig. 2A); the toxin genes sea, s, seh, sek, sel, and seq genes were found in strain MW2 (Fig. 2B); and the toxin gene seb was amplified from ATCC 14458, the toxin genes sed and sej were amplified from NTCC10656, and the toxin gene see was amplified from ATCC 27664 (Fig. 2C). The toxin genes sea, s, seg, sei, sel, sem, sen, and seo were found in strain MU50 (data not shown). We confirmed the identities of the seb, sed, see, and seq amplicons by sequencing using the corresponding toxin-specific primers. The GenBank accession numbers of the deposited sequences are presented above, in Materials and Methods.
![]() View larger version (64K): [in a new window] |
FIG. 2. PCR amplification of staphylococcal ent genes with gene-specific primers. Total DNA from reference strains N315, MW2, ATCC 14458, NTCC10656, and ATCC 27664 was amplified with gene-specific primers, and the resulting products were separated by electrophoresis on a 2% agarose gel. Lanes: Mr, molecular size markers (indicated on the left in nucleotides); A, sea; B, seb; C, s; D, sed; E, see; G, seg; H, seh; I, sei; J, sej; K, sek; L, sel; M, sem; N, sen; O, seo; P, sep; Q, seq. (A) Strain N315 DNA amplification with all 16 gene-specific primers; (B) strain MW2 DNA amplification with all 16 gene-specific primers; (C) amplification of seb for strain ATCC 14458, sed and sej for NTCC10656, and see for ATCC 27664.
|
![]() View larger version (70K): [in a new window] |
FIG. 3. Layout of staphylococcal ent genes on the microarray. Each microarray is composed of four sections, and each section contains four different oligonucleotide probes specific for each of four different ent genes in the section. (I) Schematic illustration of the ent gene microarray. Genes sea to sei are in the rows on the left, and genes sej to seq are in the rows on the right, with each gene represented by four spots (columns). The first columns of each array are printed with spotting solution (U) to assist with array orientation. (II) Quality control scan of an array. Each spot of the array is visualized because each spot contains a small amount of quality control oligonucleotide probe QCprb, which hybridizes with a Cy3-labeled oligonucleotide, Cy3-QC, which is used to spike each target mixture. The spot is visualized with a 543-nm laser. (III) Schematic showing microarray detection of sep. (IV) Microarray analysis of sep genomic DNA from strain N315, which was amplified with sep-specific primers. The resulting PCR product was fluorescently labeled with Cy5 and hybridized to the ent gene array, which was then scanned with a 632-nm laser.
|
For microarray analysis of the ent-specific primers amplicons, DNAs from S. aureus reference strains (strains N315, MU50, MW2 ATCC 14458, NTCC10656, and ATCC 27664) were amplified by using the ent gene-specific primers, and fluorescently labeled ssDNA was synthesized from each of the ent amplicons by PE of the PCR products (see Materials and Methods).
The microarray accurately detected each toxin gene. For example, the detection of sep is shown schematically in Fig. 3III, and the actual results from microarray hybridization are shown in Fig. 3IV. It is noteworthy that occasional cross-reacting spots are observed, such as a sel spot (Fig. 3IV, spot L2), which cross-reacted with sep amplicons because of sequence similarity. However, because four oligonucleotide probes were used to detect each ent gene, a small number of cross-reacting spots did not interfere with toxin identification. Figure 4 shows the results of microarray analysis of all 16 ent genes (sea to seq) amplified by specific primers.
![]() View larger version (75K): [in a new window] |
FIG. 4. Microarray-based detection of 16 staphylococcal ent genes with gene-specific primers. Total DNAs from five S. aureus reference strains (strains N315, MW2, ATCC 14458, NTCC10656, and ATCC 27664) were amplified with the ent gene-specific primers, with the panel labels A to E and G to Q corresponding to the lanes described in the legend to Fig. 2. The ssDNAs derived from the PCR products were labeled with Cy5 and hybridized to the ent gene microarray (Fig. 3), which was then scanned with a 632-nm laser.
|
Development of one-tube assay for typing ent genes. Our attempts to combine all 16 primer pairs in one tube for a multiplex PCR assay did not succeed in amplifying all target ent genes. Several amplicons were not represented; and the yields of seo, sen, seh, and sej were too low to be detected by microarray hybridization (data not shown). This is likely due to interference between primers that significantly reduces the levels of amplification of particular toxin genes (data not shown).
We overcame this problem by developing degenerate primers (universal primers) corresponding to the highly conserved regions of ent (Table 1) and by adding a primer specific for the underrepresented seh gene to the universal primer set. This combination significantly improved the representation of all 16 ent genes. Control DNA and the five individual strains used in the mixture are presented in three-by-two matrix composite image (Fig. 5). All 16 ent genes in the mixture were detected in this analysis (Fig. 5AI). Interestingly, ATCC 14458 (Fig. 5BIII), which is known to code for seb, was found to contain the recently discovered sek and seq genes. Similarly, NTCC10656 was found to encode the seg, sei, sej, sem, sen, and seo genes, in addition to the sed gene, the presence of which in NTCC10656 was already known (Fig. 5BI); and the seq gene was unexpectedly found in ATCC 27664 (Fig. 5BII).
![]() View larger version (63K): [in a new window] |
FIG. 5. One-tube microarray-based detection of 16 staphylococcal ent genes with universal primers. Genomic DNAs from five S. aureus reference strains (strains N315, MW2 ATCC 14458, NTCC10656, and ATCC 27664) were amplified with a mixture of ent gene-specific universal primers supplemented with the primers specific for seh. The resulting PCR amplicons were subjected to PE with a mixture of the reverse ent gene-specific universal primers supplemented with the reverse primers specific for seh, followed by Cy5 chemical labeling. The labeled targets were hybridized to the ent gene microarray, which was then scanned with a 632-nm laser. A control array which contains a mixture of DNA representing all genes (from strains N315, MW2 ATCC 14458, NTCC10656, and ATCC 27664) was included for demonstration of the ability of the assay to detect 16 ent genes in a single sample. AI, strain control array; AII, strain N315; AIII, MW2; BI, NTCC10656; BII, ATCC 27664; BIII, ATCC 14458.
|
![]() View larger version (79K): [in a new window] |
FIG. 6. One-tube microarray-based analysis of previously analyzed S. aureus strains. Genomic DNA from four strains analyzed previously (strains Mu50, FRI361, A90322, and MNDON) was amplified by using a mixture of ent gene-specific universal primers supplemented with the primer specific for seh. The resulting PCR amplicons were subjected to PE with a mixture of the reverse ent gene-specific universal primers supplemented with the reverse primer specific for seh, followed by Cy5 chemical labeling, and were then hybridized to the ent gene microarray. The resulting image was scanned with a 632-nm laser. The analysis of the four strains is presented in a two-by-two matrix composite image. AI, strain Mu50; AII, strain FRI361; BI, A90322; BII, MNDON.
|
|
|
|---|
One problem with all present PCR-based methods is that novel or unexpected toxin genes can lead to false-positive or -negative results. For example, we observed that all sea gene-specific primers described in the literature can be used for successful amplification of sep as well. This might lead to the mistaken conclusion that a strain encodes sea and incorrect data about the distributions of ent genes and their roles in food poisoning. Since the relationship between the presence of a specific enterotoxin (or a combination of enterotoxins) and human food poisoning is not clearly understood, there is a need for a reliable and universal method for unambiguous identification of known ent genes and for detection of novel ent genes.
We describe here a combination PCR-microarray assay for detection and identification of ent genes. The analysis is based on PCR amplification of a variable region of almost all known ent genes with a single set of degenerate primers whose sequences correspond to those of the flanking highly conserved regions. The amplicons are then identified by analysis on the oligonucleotide microarray. This combined method takes advantage of the strengths of each technique. PCR amplification is highly sensitive, detecting target genes from genomic DNA even when they are present at low concentrations. DNA-DNA hybridization on the microarray increases the specificity of the assay and allows parallel analysis of multiple sequences simultaneously. In addition, the nonspecific amplicons often seen in PCRs have no effect on the hybridization of the targets with specific oligonucleotide probes.
Microarrays are not in common use in average laboratories today. However, like any new technology, as more applications are developed for the microarray technology, it will become more practical and may well become widely used. In the work described here, the presence of genes for each of 16 ent genes was analyzed by four methods: PCR amplification with primers specific for each of the 16 enterotoxin genes, followed by analysis by gel electrophoresis (Fig. 2); PCR amplification with specific primers (Fig. 4), followed by analysis by the microarray assay; amplification of the 16 genes with universal primers, followed by microarray analysis (Fig. 5); and sequencing of the enterotoxin genes to verify their identities. Thus, using two amplification methods (methods with specific primers and universal primers) as well as three DNA analysis methods (gel electrophoresis, DNA sequencing, and DNA microarray analysis), we verified the performance of the method. Using this array, we have shown that some strains previously analyzed by immunological methods contain additional ent genes not detected by the original assays (Fig. 5 and 6).
In our microarray system, we used relatively short oligonucleotides (21 to 30 nucleotides) for three reasons. First, shorter oligonucleotide probe sequences (<25 bp) are often capable of detecting a single-nucleotide mismatch between the target ssDNA and the oligonucleotide probe, which allows detection of minor genetic variants in target genes in a bacterial population. Second, the shorter oligonucleotide probes allow independent testing of several species-specific regions of each gene, enabling effective coverage of the target sequence with more (but shorter) oligonucleotide probes. This reduces the probability of misidentification. Third, short oligonucleotides reduce the cost of chip production.
The redundancy of the testing (the number of spots representing each gene) is one way to reduce the risk of SE misidentification. While only one portion of each SE gene (the variable region shown in Fig. 1) is used for the analysis, leaving open the possibility of significant sequence variation in other parts of the genes, such variation is not common.
The main disadvantage of simultaneous PCR amplification of multiple targets is that different copy numbers of the genes in a cell result in different signal intensities on the array. This might be overcome by use of supplemental specific primers to improve the detection of underrepresented amplicons (Fig. 5 and 6).
Many of the known SEs have been discovered only in the last few years, including some, such as sep, that were discovered only through the sequencing of the S. aureus N315 genome (22). Given the genetic variability and the spread of the ent gene family, it is possible that there are other, as yet unknown, ent genes. However, the similarity in the conserved regions of these genes (Fig. 1) suggests that any additional gene family members will share those conserved sequences. Thus, it is possible that this assay might lead to the discovery of additional ent genes in new strains. The amplicons of the novel ent genes can be discernible as amplicons that hybridize to common spots but not to any ent gene-specific spots.
Multiple SE genes are commonly found in S. aureus strains (19, 20, 32). Among 198 S. aureus isolates implicated in S. aureus infections in France, 85.4% expressed multiple SEs (19). Our analysis of these data suggests that the majority (92%) contain multiple SEs, especially the egc cluster (seg, sei, sen, seo, and sem). Among the S. aureus isolates implicated in food-poisoning episodes in Japan, 93% expressed SEs, while only 72.2% of isolates from healthy people expressed SEs (32).
One explanation for the presence of multiple toxins in most strains is that these genes are often structurally linked. Several pathogenicity islands have been reported in S. aureus, including one encoding the toxic shock syndrome toxin (tst) and s- and sel-like proteins (13) and another encoding SE serotypes B, K, and Q (41). Others have reported pathogenicity islands containing the tst gene and an open reading frame with sequence similarity to those encoding SEs (25) and a region contains enterotoxins D and J (42). In addition, as noted above, a group of five toxin genes (seg, sei, sen, seo, and sem) is encoded by the enterotoxin gene cluster, egc (20). Interestingly, in the study of 198 clinical isolates by Jarraud et al. (19), half of the 14 strains that carried only a single enterotoxin gene had the sea gene, perhaps because it has been shown to be associated with a structurally unstable, possibly mobile, discrete genetic element (8) that is not part of the egc cluster.
In terms of the functionalities of SEs, multiple toxins with diverse spectra of activities may offer the pathogen versatility in terms of the host range. For example, it has been shown that different types of SEs have different emetic response activities in house musk shrews, although it was thought that there are no differences in the emetic response activities of SEA, SEB, SEC, SED, and SEE in humans and primates (18). In addition, S. aureus expression of specific ent genes may depend on the host tissue and may play a role in the adaptation of S. aureus to the host environment (4). Some have speculated that some cases of food poisoning result from the simultaneous expression of several enterotoxins in a single pathogenic S. aureus strain rather than from the expression of a single toxin.
However, it is unclear whether all the toxins are actually expressed and what the biological and clinical effects of multiple toxins might be. The method presented here can detect ent genes but does not determine whether the gene is expressed or whether the encoded protein is functional. The levels of correlation between the presence of genes that code for the production of SE (as determined by PCR) and the expression of these genes (as determined by enzyme-linked immunosorbent assay) were 100% for SEA and SEE, 86% for SEC, 89% for SED, and 47% for SEB (30). Thus, the actual presence of the toxin needs to be assessed by an immunological or activity assay.
In summary, the PCR-microarray method described here is a potentially powerful tool for the analysis of S. aureus strains. We used this method to test clinical isolates analyzed previously and found that these isolates frequently carry the genes for numerous toxins, including some of the newly discovered SEs. More studies need to be done to understand the biological regulation and the biological and clinical effects of multiple enterotoxins. Our method has great potential for application in high-throughput screening and accurate genotyping of ent genes, which are especially important in epidemiological studies.
This work was supported in part by USDA grant 0013000 and funding provided by the FDA Office of Science.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»