Previous Article | Next Article ![]()
Journal of Clinical Microbiology, August 2005, p. 3615-3623, Vol. 43, No. 8
0095-1137/05/$08.00+0 doi:10.1128/JCM.43.8.3615-3623.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
Ghent University, Faculty of Veterinary Medicine, Department of Veterinary Public Health and Food Safety, Merelbeke,1 Veterinary and Agrochemical Research Centre, Brussels,2 Ministry of the Flemish Community, Center for Agricultural Research, Department for Animal Product Quality and Transformation Technology, Melle, Belgium3
Received 13 December 2004/ Returned for modification 19 January 2005/ Accepted 12 April 2005
|
|
|---|
|
|
|---|
PCR-based molecular techniques are easy to perform and rapid. Repetitive-element PCR (rep-PCR) uses primers complementary to naturally occurring, highly conserved, repetitive DNA sequences. These noncoding sequences are present in multiple copies in the genomes of most gram-negative and several gram-positive bacteria (10). Examples of these repetitive elements are the repetitive extragenic palindromic (REP) sequences, the enterobacterial repetitive intergenic consensus (ERIC) sequences, the BOX sequences, and the polytrinucleotide (GTG)5 sequence (18).
According to Van Lith and Aarts (17), it is possible to use the primer set ERIC1R-ERIC2 to discriminate Salmonella serotypes. Burr et al. (3) and Milleman et al. (11) tested the same primer set and concluded that the fingerprints obtained were not correlated with serotypes. Two studies (8, 9) showed that elevated annealing temperatures combined with the use of a commercial PCR mix improve the reproducibility and the resolving power of rep-PCR with the ERIC2 and BOXA1R primers.
The studies performed yielded conflicting results and evaluated only the ERIC primer set, the ERIC2 primer, and/or the BOX primer on a limited number of serotypes and/or on a limited number of strains per serotype. The purpose of this study was to evaluate five different rep-PCR techniques for the discrimination of Salmonella isolates, including the (GTG)5 primer (5, 18). Selected rep-PCR techniques were further evaluated for their powers of discriminating between as many as 80 different serotypes as well as for genetic diversity within several serotypes.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Salmonella
isolates used in the experiments
|
Only when elevated annealing temperatures were tested as described by Johnson and Clabots (8) were DNA extracts used instead of lysates. DNA was extracted using a commercial genomic DNA purification kit (AquaPure genomic DNA isolation kit 732-6340; Bio-Rad Laboratories, Hercules, Calif.) according to the manufacturer's instructions.
Selection of primers for rep-PCR. Salmonella strains belonging to 22 serotypes were typed with the primer sets ERIC1R-ERIC2 and REP1R-REP2I and primers ERIC2, BOXA1R, and (GTG)5. The best primer or primer set and the best corresponding annealing temperatures were selected on the basis of the number, distribution, and clarity of bands in the obtained fingerprints.
Reproducibility of rep-PCR. In the second experiment, three different lysates were made on three separate days, starting from different bacterial cultures of five selected serotypes (Fig. 1). Reproducibility was evaluated on the different lysates by using three different PCR runs on the same thermal cycler.
![]() View larger version (133K): [in a new window] |
FIG. 1. Cluster
of the composite data set and ERIC and (GTG)5 fingerprints
of three different lysates made on three different days (t1, t2, and
t3) and run in three different PCR runs in the same thermal cycler. The
similarities between the fingerprints were calculated using the Pearson
correlation (optimization, 1%; position tolerance, 1%), and the
fingerprints were grouped according to their similaritiesby use of the UPGMA algorithm. The vertical grey line shows the
delineation level of 92.5%. The last column shows the strain numbers.
The grey bar at the top of the figure shows the part (79.3%
to 84.3%) of the ERIC fingerprints that is not taken into account to
calculate the cluster, as explained in the
text.
|
rep-PCR on isolates belonging to the same serotypes. Strains belonging to the same serotype, but of different origins and genetically different, were fingerprinted to examine the genetic diversity (stability) of the rep-PCR within serotypes with the selected primer or primer set. The aim of this experiment was to investigate whether genetically different strains of the same serotype resulted in the same fingerprint. The genetic diversity of the strains had been tested by pulsed-field gel electrophoresis using XbaI as the restriction enzyme (2). Fifty five strains of 10 different serotypes were fingerprinted: 13 serotype Enteritidis, 9 serotype Typhimurium, 5 serotype Hadar, 5 serotype Derby, 5 serotype Virchow, 5 serotype Infantis, 4 serotype Blockley, 4 serotype Brandenburg, 3 serotype Agona, and 2 serotype Indiana strains.
PCR. PCR amplifications were performed in a Perkin-Elmer 9700. The sequences of the primers used and the amplification protocols were those described by Versalovic et al. (18). The reaction mixtures for primers ERIC1R, ERIC2, REP1R, REP2I, and BOXA1R were as described by Rademaker and de Bruijn (15), but Tween 20 (0.5%) and gelatin (0.01%) (6) were added when lysates were used. The reaction mixture for the (GTG)5 primer contained the following: 10 mM Tris HCl (pH 8.3), 50 mM KCl, 1.5 mM MgCl2, 0.2 mM deoxynucleoside triphosphates, 60 pmol (GTG)5 (Eurogentec, Seraing, Belgium), 0.5% (vol/vol) Tween 20, 0.01% (wt/vol) gelatin, 1 U Taq DNA polymerase (YellowStar Taq; Eurogentec, Seraing, Belgium), and 1 µl crude cell lysate with a final volume of 25 µl.
Elevated annealing temperatures were also tested in the first experiment. An annealing temperature of 70°C for ERIC2 and BOXA1R and an amplification protocol of 35 cycles without an initial touch-down were used (8), but with the reaction mixture of Rademaker and de Bruijn (15) instead of Ready to Go PCR beads (8). Elevated annealing temperatures were also tested using modified amplification protocols of Versalovic et al. (18). Modifications consisted of annealing temperatures of 57°C for ERIC2 and 65°C for BOXA1R.
The PCR products were size separated in a 1.5% agarose gel in 1x Tris-borate-EDTA at 120 V for 4 h. The gels were stained with ethidium bromide and digitally captured under UV light. The gel images were visually compared and analyzed with GelCompar, version 3.0 (Applied Maths, Kortrijk, Belgium) using a mixture of a 100-bp (Invitrogen, Paisley, United Kingdom) and a 500-bp (Bio-Rad Laboratories, Hercules, Calif.) ladder as the normalization reference (15). The similarities between the fingerprints were calculated using the Pearson correlation (with an optimization of 1% and a position tolerance of 1%), and the fingerprints were grouped according to their similarities by use of the UPGMA (unweighted-pair group method using arithmetic averages) algorithm.
Statistical analysis of dendrograms. To assess the variability introduced by the preparation of lysates and the PCR run in the clustering of the fingerprints, several indices were derived from the similarity matrix obtained from experiment 2 (reproducibility of rep-PCR) by the method of Johnson and Clabots (8). For all strains, a similarity index (SI) was calculated as the mean of all pairwise correlations between different replicates of a strain at a certain level of a factor (lysate or PCR run). A lower SI can be interpreted as more variability attributable to the factor. The differentiation index (DI) was defined as the maximum of all pairwise correlations between different strains, at a certain level of a factor in one strain and all possible combinations in the other; this was repeated for each strain. A higher DI can be interpreted as more variability attributable to the factor. Finally, the difference between the similarity index and the differentiation index (called "net discriminating power" by Johnson and Clabots [8]) can be considered to be a measure for the discriminatory power of the strain. A higher value, calculated as 100 (SI DI), which can be defined as the net variability index, means more variability attributable to the factor on the clustering.
|
|
|---|
According to Versalovic et al. (18), the optimal number of bands for rep-PCR is 8 to 15. The upper limit of bands, however, depends on the resolution of the electrophoretic system; the higher the resolution, the more bands can be reliably separated and visualized. With a 1.5% agarose gel separation on 20-cm-long gels, as used in this study, the upper limit was judged to be around 20 distinct fragments. On the basis of the number and clarity of bands, their even distribution over the whole fingerprint, and discriminatory power, the ERIC primer set and the (GTG)5 primer were chosen for use in subsequent experiments. The above data indicate that this primer and this primer set have the greatest potential to discriminate Salmonella strains belonging to different serotypes.
Reproducibility. All fingerprints obtained with the ERIC primer set had a band at 250 bp (Fig. 1). This high-intensity band was excluded from the calculation of the Pearson correlation in this and subsequent experiments. The Pearson correlation takes the whole profile into account, so exclusion of dense bands often allows more meaningful clustering of groups (4, 7).
Each of the five serotypes clustered together with a minimum similarity coefficient of 74% with the ERIC primer set (data not shown), 83% with the (GTG)5 primer (data not shown), and 80% for the composite data set [ERIC plus (GTG)5] (Fig. 1). The low similarity coefficients were the result of the three different PCR runs. In Table 2 a quantitative assessment is made of the variability attributable to the PCR-run and to the preparation of the lysate in the clustering of the combined ERIC- and (GTG)5-PCR fingerprints. These results clearly indicate that the variability attributable to the PCR run (with the lysate factor kept constant) is systematically higher; this can be deduced from the lower SI values and the higher net variability index [100 (SI DI)]. It is therefore advisable to compare results within the same PCR run. Within one PCR run, the minimum similarity coefficient between the three different lysates (i.e., lysates made on different days) was 95% for the ERIC primer set, except for 4 out of a total of 45 lysates (data not shown). The minimum similarity coefficient within one PCR run for the three different lysates was 94% for the (GTG)5 primer, with the exception of six lysates (data not shown). These exceptions were due to overall weaker patterns, locally weaker bands, or normalization errors. For the composite data set, the minimum similarity coefficient for the three different lysates within one PCR run was 92.5%, except for two lysates: KS077, made on the first day and processed in the first PCR run, and MB1720, made on the third day and processed in the third PCR run (Fig. 1). Based on these results, the delineation levels for serotype discrimination in subsequent experiments were set at 95% for the ERIC primer set, 94% for the (GTG)5 primer, and 92.5% for the composite data set.
|
View this table: [in a new window] |
TABLE 2. Assessment
of variability attributable to PCR and lysates in the clustering of
rep-PCR fingerprints
|
![]() View larger version (117K): [in a new window] |
FIG. 2. Cluster
of the composite data set and ERIC and (GTG)5 fingerprints
of 80 different serotypes and five isolates that were not typeable by
serotyping. The similarities between the fingerprints were calculated
using the Pearson correlation (optimization, 1%; position tolerance,
1%), and the fingerprints were grouped according to their similarities
by use of the UPGMA algorithm. The vertical grey line shows the
delineation level of 92.5%. The second column shows the antigenic
formulas of the serotypes given in the first column. The last column
shows the strain numbers. The grey bar at the top of the figure shows
the part (79.3% to 84.3%) of the ERIC fingerprints that is not taken
into account to calculate the cluster, as explained in the
text.
|
In the composite data set (Fig. 2), two pairs of strains were not discriminated from each other at the delineation level of 92.5%. The two nontypeable strains MB2563 and MB2564 had a similarity coefficient of 98.9%, and serotype Paratyphi B (VVG02/0726) and isolate KS128, which was not typeable by serotyping, had a similarity coefficient of 92.9%.
Genetic diversity (stability). Figure 3 shows the fingerprints of the 55 isolates belonging to 10 serotypes obtained with the ERIC primer set and the (GTG)5 primer, as well as the clustering of the composite data set. With the ERIC primer set, 24 different clusters and/or separate strains were distinguished with 95% as the delineation level (data not shown). All strains belonging to serotype Agona or Indiana clustered together within the serotype. Serotype Blockley was divided into two clusters and/or separate strains, and serotype Hadar was divided into three clusters and/or separate strains, although the profiles within one serotype were visually the same for both clusters. Serotypes Derby, Brandenburg, and Virchow each had one strain (MB1736, MB1724, and MB2396, respectively) with an ERIC fingerprint that differed in one band from the other strains of the respective cluster. Serotype Infantis strains were divided into three clusters. The difference consisted of bands of more or less intensity at 400 bp. The nine strains of serotype Typhimurium clustered into two groups. The difference consisted of a double or single band at 700 bp. The serotype Enteritidis strains were divided into six clusters. Strain MB2499, strain MB1535, and strain MB1221 had each a different fingerprint from the other 10 strains. The other 10 strains were grouped together in three clusters, and the differences consisted in bands of different intensity at 2,000 bp.
![]() View larger version (120K): [in a new window] |
FIG. 3. Cluster
of the composite data set and ERIC and (GTG)5 fingerprints
of 55 genetically different strains belonging to 10 serotypes. The
similarities between the fingerprints were calculated using the Pearson
correlation (optimization, 1%; position tolerance, 1%), and the
fingerprints were grouped according to their similarities by use of the
UPGMA algorithm. The vertical grey line shows the delineation level of
92.5%. The last column shows the strain numbers. The grey bar at the
top of the figure shows the part (79.3% to 84.3%) of the ERIC
fingerprints that is not taken into account to calculate the cluster,
as explained in the
text.
|
Figure 3 shows the cluster of the composite data set of both primers and the fingerprints. With the delineation level of 92.5%, 21 different clusters and/or separate strains were distinguished. The strains belonging to serotypes Hadar, Indiana, Infantis, and Virchow clustered together within the serotype. The strains of serotypes Brandenburg, Typhimurium, and Agona were divided into two clusters. Serotypes Blockley and Derby were split up into three clusters, whereas serotype Enteritidis was divided into five clusters.
|
|
|---|
All isolates generated fingerprints, including the five isolates which were not typeable by serotyping. All but a few serotypes had unique fingerprints. Strains MB2563 and MB2564, which were not typeable by serotyping, had identical fingerprints with both primers, meaning that they are probably genetically identical strains. Serotype Paratyphi B and one strain that was not typeable by serotyping also had identical fingerprints with both primers, although the similarity coefficient was below the delineation level for the ERIC primer set. Serotype Enteritidis, a strain that was not typeable by serotyping, and a strain with antigenic formula 9:: had a similarity coefficient of 95% with the (GTG)5 primer. This clearly shows that rep-PCR can reveal additional information when serotyping is not possible. Furthermore, it is possible that serotype Enteritidis and the strain with antigenic formula 9:: belong to the same serotype but that some somatic and flagellar factors of the latter were not expressed during serotyping. The same can be concluded for serotype Infantis and strain MB2529, with antigenic formula 6,7:r:, which had identical fingerprints with the ERIC primer set. Serotype Typhimurium (O5+) and serotype Typhimurium var. Copenhagen (O5) produced the same fingerprint with the ERIC primer set. With the (GTG)5 primer, a difference in one high-intensity band at 1,200 bp was observed among the serotype Typhimurium strains tested, which, however, did not correlate with the two varieties in this serotype.
The genetic diversity (stability) experiment further showed that not all isolates with the same serotype had the same fingerprint. However, the isolates with the same serotype still clustered together at a similarity coefficient of 85% or higher, except for two serotype Enteritidis strains. Strain MB2499 was isolated from a reptile, and strain MB1535 was isolated from a deer. Both were also atypical by other characterization methods such as randomly amplified polymorphic DNA and virulence typing (unpublished results). As mentioned by Torpdahl and Ahrens (16), serotype Enteritidis is a polyphyletic serotype. Although strains in this serotype are not genetically related, they share some characteristics such as the somatic and flagellar factors.
The discriminatory powers of the ERIC primer set and the (GTG)5 primer are similar, with 24 clusters (and/or separate strains) obtained by the former and 23 clusters (and/or separate strains) obtained by the latter for a collection of 55 strains belonging to 10 serotypes. Nevertheless, this experiment revealed that the ERIC primer set and the (GTG)5 primer are complementary, since they did not discriminate the same strains within certain serotypes. This experiment clearly shows that one serotype does not always correspond to only one ERIC or (GTG)5 fingerprint, but the fingerprint heterogeneity within a serotype seems to be limited to the absence or presence of mostly one and sometimes two bands for a primer or primer set or to differences in intensities of some bands. In a few restricted cases (e.g., MB1221 in ERIC-PCR of experiment 4 [Fig. 3]), an apparent fingerprint heterogeneity seemed to be due to normalization artifacts. Nevertheless, this experiment indicates that direct serotype identification by rep-PCR may be erroneous if only one reference fingerprint is included.
Other studies have also evaluated the Salmonella discriminating ability of rep-PCR. Most studies (3, 11, 17) tested only the ERIC primer set, with conflicting results. According to Van Lith and Aarts (17), it is possible to use the ERIC1R-ERIC2 primer set to discriminate Salmonella serotypes. Their study was performed on 65 Salmonella isolates of 49 serotypes. They concluded that all serotypes produced unique fingerprints and that the isolates within one serotype had identical patterns. According to Burr et al. (3), who tested the same primer set on 89 Salmonella isolates of 22 serotypes, the fingerprints obtained did not correlate with serotypes. Milleman et al. (11) also tested the ERIC primer set on 56 serotype Typhimurium and 14 serotype Enteritidis strains. They concluded that ERIC-PCR cannot be used to discriminate Salmonella serotypes, since all serotype Enteritidis isolates and some serotype Typhimurium isolates shared the same fingerprint. According to two other studies (13, 14), elevated annealing temperatures improve the reproducibility and resolving power of rep-PCR with the ERIC2 and BOXA1R primers. In the first study only 12 strains of 12 serotypes and in the second study 70 isolates of 15 serotypes were evaluated. We obtained more bands with the ERIC primer set than were obtained in the studies mentioned above. This is probably the reason why some studies revealed that no serotype-dependent fingerprints were obtained while other studies showed the opposite. The PCR conditions are probably critical factors, which also helps explain why in our study no serotype-dependent fingerprints were obtained at elevated annealing temperatures as described by Johnson and Clabots (8).
It can be concluded that in certain epidemiological studies, ERIC-PCR and/or (GTG)5 can be used to limit the number of strains that have to be serotyped, although it is useful only with isolates analyzed in one PCR run. Only one isolate of each cluster has to be sent to the national reference laboratories for serotyping. The reproducibility of isolates in one PCR run, the discriminatory power, and the genetic diversity (stability) of the fingerprint are very similar for the Eric primer set and the (GTG)5 primer, so both primers are equally able to discriminate Salmonella serotypes. These techniques also produce fingerprints for nontypeable strains, which can be molecularly serotyped on the basis of the relationship to known serotypes. Moreover, they are also able to reveal serotyping errors.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»