Previous Article | Next Article ![]()
Journal of Clinical Microbiology, July 2006, p. 2338-2342, Vol. 44, No. 7
0095-1137/06/$08.00+0 doi:10.1128/JCM.00425-06
Copyright © 2006, American Society for Microbiology. All Rights Reserved.
Ege University Medical Faculty, Department of Clinical Microbiology, Mycobacteriology Laboratory, 35100 Izmir, Turkey
Received 27 February 2006/ Returned for modification 4 April 2006/ Accepted 24 April 2006
|
|
|---|
32 µg/ml for RIF. The Genotype MTBDR assay also correctly identified 27 of 37 INH-resistant isolates (73%) with mutations in katG codon 315. In conclusion, the Genotype MTBDR assay may be useful for the rapid diagnosis of the most common mutations found in multidrug-resistant M. tuberculosis strains. However, the test results should always be confirmed with phenotypic methods. |
|
|---|
Collectively, DNA sequencing studies demonstrate that more than 95% of RIF-resistant M. tuberculosis strains have a mutation within the 81-bp hotspot region of the rpoB gene (5, 12, 25). In contrast, the mutations causing INH resistance are located in several regions (28). Approximately, 34.6 to 94.3% of INH-resistant strains have been found to contain mutations in codon 315 of the katG gene (9, 10, 15, 18, 27), 2.9 to 21.5% contain mutations in the inhA promoter region (9, 10, 18, 27), and an additional 2 to 11.5% have mutations in the ahpC-oxyR intergenic region (9, 10, 27).
Several molecular methods have been developed in recent years to evaluate the rpoB and katG genes for RIF and INH resistance, including DNA sequencing, line probe assay, and analysis with DNA microarrays. Molecular assays have been established to allow the prediction of drug resistance in clinical M. tuberculosis isolates within one working day and potentially are the most rapid methods for the detection of drug resistance (5, 6, 9, 11, 12). The Genotype MTBDR assay (Hain Lifescience GmbH, Nehren, Germany) is a novel kit-based method for the detection of the most common mutations in the M. tuberculosis katG and rpoB genes (9, 11).
The aim of this study was to determine the performance of the Genotype MTBDR assay for rapid detection of RIF and INH resistance in Turkish M. tuberculosis isolates of known rpoB sequence and INNO-LiPA Rif.TB patterns. In the first step, rpoB and katG mutations were determined by the Genotype MTBDR assay. The results obtained by the Genotype MTBDR assay were then compared with the results obtained by DNA sequencing, INNO-LiPA Rif.TB, and phenotypic susceptibility testing.
|
|
|---|
Determination of MICs for RIF and INH. All isolates resistant to 1 µg of RIF per ml and resistant to 0.2 µg of INH per ml were tested on 7H10 medium, with 2-, 4-, 8-, 16-, and 32-µg/ml concentrations of RIF and with 1-, 2-, and 4-µg/ml concentrations of INH, respectively.
Genotypic characterization. DNA sequencing was performed with an automated DNA sequencer (model 310; Applied Biosystems, Foster City, Calif.). The katG and inhA genes were amplified by PCR using primers described previously and then sequenced by using the same primers (18, 24).
INNO-LiPA Rif.TB assay. The INNO-LiPA Rif.TB (Innogenetics N.V., Ghent, Belgium) test was used according to the instructions of the manufacturer. The RIF resistance-determining region of the rpoB gene was amplified with specific biotin-labeled primers. The biotinylated PCR product was then denatured and hybridized to a strip with 10 specific oligonucleotide probes. M. tuberculosis was detected in a sample by use of the M. tuberculosis complex-specific probe. The reactivities of an amplified fragment with the S-type probes for the wild type (probes S1 through S5) were used to detect the mutations that lead to RIF resistance in M. tuberculosis. Furthermore, four probes (R-type probes) were specifically designed to hybridize to the sequences of the four most frequently observed mutations: R2 (D516V), R4a (H526Y), R4b (H526D), and R5 (S531L).
In conclusion, when all of the wild-type S probes gave a positive signal and all the R probes reacted negatively, the M. tuberculosis isolate was considered susceptible to RIF. When at least one negative signal was obtained with the wild-type S probes, the isolate was considered RIF resistant (INNO-LiPA Rif.TB S patterns). When the resistance to RIF was due to one of the four most frequently observed mutations described above, a positive reaction was obtained with one of the four R probes and was always accompanied by a negative reaction with the corresponding S probe (INNO-LiPA Rif.TB R patterns).
Genotype MTBDR assay. The Genotype MTBDR assay (Hain Lifescience GmbH, Nehren, Germany) was used according to the instructions of the manufacturer. Briefly, for DNA preparation, 0.5 ml of actively growing (1 to 2 weeks old) liquid cultures (MB/BacT; bioMérieux, Marcy l'Etoile, France) was used. Liquid cultures were centrifuged at 10,000 x g for 15 min. Supernatants were discarded and suspended in 100 µl of distilled water, boiled for 20 min, sonicated for 15 min, and then centrifuged at 10,000 x g for 5 min. Supernatants were used for PCR amplification. For amplification, 35 µl of primer-nucleotide mix (provided with the kit), amplification buffer containing 2.5 mM MgCl2, 1.25 U of FastStart Taq polymerase (Roche Molecular Diagnostics, Mannheim, Germany), and 5 µl of supernatant in a final volume of 50 µl were used. The amplification protocol consisted of 10 min of denaturing at 95°C; 10 cycles of 30 s at 95°C and 120 s at 58°C; 20 additional cycles of 25 s at 95°C, 40 s at 53°C, and 40 s at 70°C; and a final extension at 70°C for 8 min. PCR products were analyzed in 1.5% agarose gel for the control of incomplete or marginal amplification. The biotinylated PCR products were then denatured and hybridized to a strip with specific oligonucleotide probes. Hybridization and detection were performed in an automated washing and shaking device (TwinCubator; Hain Lifescience GmbH, Nehren, Germany). The program was started after 20 µl of the amplification products was mixed with 20 µl of denaturing reagent (provided with the kit) for 5 min in separate troughs of a plastic well. Following the addition of 1 ml of prewarmed hybridization buffer, membrane strips were placed in each trough. The hybridization procedure is performed at 45°C for 0.5 h and is followed by two washing steps. For colorimetric detection of hybridized amplicons, streptavidin conjugated with alkaline phosphatase and substrate buffer was added. After final washing, strips were air dried.
Each strip contains 17 probes, including amplification and hybridization controls. M. tuberculosis was detected in a sample by the use of the M. tuberculosis complex-specific probe. The rpoB- and katG-specific regions were detected by rpoB and katG control probes, respectively. The reactivities of an amplified fragment with the five rpoB wild-type probes (rpoB WT1 through rpoB WT5) and one katG wild-type probe were used to detect the mutations that lead to RIF and INH resistance in M. tuberculosis. Furthermore, six probes (mutant probes) were specifically designed to hybridize to the sequences of the four most frequently observed rpoB and two katG mutations: rpoB D516V, rpoB H526Y, rpoB H526D, rpoB S531L, katG S315T1, and katG S315T2.
In conclusion, when all of the wild-type probes gave a positive signal and all of the mutant probes reacted negatively, the M. tuberculosis isolate was considered susceptible to RIF and INH. When at least one negative signal was obtained with the rpoB wild-type probes, the isolate was considered resistant to RIF, and same was true for the katG wild-type probe. When the resistance to RIF or INH was due to one of the six most frequently observed mutations described above, a positive reaction was obtained with at least one of the six mutant probes and was always accompanied by a negative reaction with the corresponding wild-type probe.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Comparison of Genotype MTBDR test results with DNA sequencing data, INNO-LiPA Rif.TB profiles, and the MICs of RIF in Turkish RIF-resistant isolates (n = 41) of M. tuberculosisa
|
![]() View larger version (20K): [in a new window] |
FIG. 1. Locations of Genotype MTBDR and INNO-LiPA Rif.TB probes within the 81-bp hotspot cluster of the rpoB gene.
|
![]() View larger version (49K): [in a new window] |
FIG. 2. Representative results for patterns of the isolate which had a CGG insertion between codons 514 and 515 obtained with the Genotype MTBDR assay and INNO-LiPA Rif.TB assay. The positions of the oligonucleotides and the marker lines are given. The specificity and targeted genes of the lines are shown from top to bottom as follows. The Genotype MTBDR assay (lane 1): conjugate control; amplification control (23S rRNA); M. tuberculosis complex-specific control (23S rRNA); control for rpoB amplification; rpoB wild-type probes located in the 81-bp hotspot region 5 to 9; rpoB mutant (Mut) probes with mutations in codons 516, 526, and 531; control for katG amplification; katG codon 315 wild-type probe; katG codon 315 mutation probes (sequences in parentheses). The INNO-LiPA Rif.TB assay (lane 2): conjugate control; M. tuberculosis complex-specific control; rpoB wild-type probes located in the 81-bp hotspot region 3 to 7; rpoB mutant probes with mutations in codons 516, 526, and 531. In lane 1, the isolate was positive with the control probes, wild-type rpoB probes, and katG S315T2 (ACA) probe and evaluated as RIF sensitive and INH resistant by the Genotype MTBDR assay. In lane 2, the isolate was positive with the control probes and wild-type rpoB probes S3, S4, and S5 but negative with the wild-type rpoB probes S1 and S2 and evaluated as RIF resistant by INNO-LiPA Rif.TB assay.
|
8 µg/ml had Asp516Val or Asp516Tyr substitutions, whereas isolates with MICs of RIF of
32 µg/ml had Ser531Leu, His526Tyr, or His526Arg mutations (Table 1). These findings suggest that the detection of mutation in the rpoB gene is not only a useful strategy for diagnosis of drug resistance to RIF in the M. tuberculosis complex but also a useful tool for the detection of the level of RIF resistance.
With regard to INH resistance, a mutation in katG codon 315 was detected in 27 of the 37 INH-resistant isolates (73%) but in none of the four susceptible strains. All distinct nucleotide exchanges in katG codon 315 of INH-resistant strains could be verified by hybridization to the oligonucleotide probe targeting the particular mutations: 25 strains carried the ACC (S315T1) mutation and two carried the ACA (S315T2) mutation. Ten of the 37 INH-resistant strains showed a wild-type hybridization pattern in the Genotype MTBDR assay (Table 2). Sequencing analysis revealed that one of these had mutations (C
T) in the ribosome-binding site region of inhA.
|
View this table: [in a new window] |
TABLE 2. Comparison of Genotype MTBDR test results with DNA sequencing data and the MICs of INH in Turkish INH-resistant isolates of M. tuberculosis (n = 37)
|
Of the 37 INH-resistant isolates, 31 had MICs of INH of >1 µg/ml. Of these 31 isolates, 27 (87.1%) had a mutation in katG codon 315 (Table 2). The previous studies suggest that mutations in katG codon 315 are associated with high levels (>1 µg/ml) of INH resistance (1, 4, 13, 27), which was also observed in our study. Mutations in the upstream region of inhA result in an increase of InhA expression, thereby elevating the drug target levels and producing INH resistance via a titration mechanism associated with various levels of INH resistance (19). In the current study, one strain had an inhA C
T mutation with a MIC of INH of >4 µg/ml. Compared to DST, the rate of concordance of the Genotype MTBDR assay results for the detection of low (0.2 µg/ml
MIC < 1 µg/ml) and high levels of INH resistance were 73% and 87.1%, respectively.
Recently, novel molecular diagnostic methods based on the PCR and a reverse hybridization procedure, such as INNO-LiPA Rif.TB assay and Genotype MTBDR assay, have been evaluated for the detection of rpoB mutations (5-7, 9, 11, 23). Both the Genotype MTBDR and INNO-LiPA Rif.TB have been proven to be robust and reproducible, and the results are easy to interpret without the extensive expert knowledge required for the interpretation of real-time PCR data or DNA sequencing data. Furthermore, they can easily be implemented in routine workflows (21, 22). The INNO-LiPA Rif.TB assay is restricted to the detection of RIF resistance. In contrast, the Genotype MTBDR assay allows the rapid and specific detection of the most frequent mutations leading to INH and RIF resistance in clinical M. tuberculosis isolates. However, because of the probe design, the Genotype MTBDR cannot detect some rare mutations, such as the CGG insertion between codons 514 and 515 within the 81-bp region of the rpoB gene.
In earlier reports (9, 11), sensitivities of the Genotype MTBDR were reported as 99% (102 of 103) and 96.4% (27 of 28) in RIF-resistant strains and 88.4% (91 of 103) and 84.4% (27 of 32) in INH-resistant strains, respectively. While Hillemann et al. (9) detected a mutation outside the 81-bp rpoB region, Makinen et al. (11) detected a mutation in the 81-bp rpoB region in RIF-resistant isolates incorrectly identified as RIF sensitive by the Genotype MTBDR. In concordance with previous reports, in the present study, the Genotype MTBDR was also able to detect a genetic alteration in 39 (95.1%) of the 41 RIF-resistant strains and 27 (87.1%) of the 31 high-level INH-resistant strains. The INNO-LiPA Rif.TB assay and Genotype MTBDR assay could incorrectly identify silent or neutral mutations that are phenotypically sensitive as resistant. However, such mutations are unlikely to be a common problem and these assays are highly sensitive and specific for the detection of RIF and INH resistance (9, 11, 16). In conclusion, both assays may be useful for the rapid screening of M. tuberculosis isolates obtained from patients suspected of having multidrug-resistant tuberculosis, but the Genotype MTBDR assay has the advantage of being able to detect resistance to both INH and RIF simultaneously. However, the test results must always be confirmed by the phenotypic methods.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»