Previous Article | Next Article ![]()
Journal of Clinical Microbiology, January 2008, p. 192-197, Vol. 46, No. 1
0095-1137/08/$08.00+0 doi:10.1128/JCM.01623-07
Copyright © 2008, American Society for Microbiology. All Rights Reserved.

Victoria González,1,2,
Andrew J. Buckton,3
Verónica Saludes,1,2
Gema Fernández,1
Lurdes Matas,1,2
Ramón Planas,4,5 and
Vicenç Ausina1,6*
Microbiology Department, Hospital Universitari Germans Trias i Pujol, Universitat Autònoma de Barcelona, Badalona, Spain,1 Centro de Investigación Biomédica en Red de Epidemiología y Salud Pública (CIBERESP), Barcelona, Spain,2 Virus Reference Department, Health Protection Agency, London, United Kingdom,3 Liver Unit, Hospital Universitari Germans Trias i Pujol, Badalona, Spain,4 Centro de Investigación Biomédica en Red de Enfermedades Hepáticas y Digestivas (CIBEREHD), Barcelona, Spain,5 Centro de Investigación Biomédica en Red de Enfermedades Respiratorias (CIBERES), Bunyola, Mallorca, Spain6
Received 14 August 2007/ Returned for modification 2 October 2007/ Accepted 25 October 2007
|
|
|---|
|
|
|---|
HCV is known to have a high rate of genetic heterogeneity. This has allowed HCV strains to be classified into a number of genetically distinct groups, known as genotypes, subtypes, isolates, and quasispecies (5). Genome sequence heterogeneity arises due to poor fidelity of the viral polymerase during replication. Sequence variability is not evenly distributed throughout the genome. The lowest sequence variability is found in the 5'NC region, which is the target of choice for many molecular diagnostics assays, including genotyping tests. Nevertheless, nucleotide sequencing coupled with phylogenetic analysis of more-variable genomic regions has been recommended for HCV genotyping in consensus proposals (27). As patients infected with different genotypes respond differently to antiviral drug therapy, identification of the infecting genotype has become important to guide the correct dose and duration of current combination therapy (pegylated alpha interferon plus ribavirin) (13, 19, 23).
A new HCV genotyping method (HCV genotyping analyte-specific reagent [ASR] assay; Abbott Molecular Inc., Des Plaines, IL) based on real-time PCR technology has recently been commercialized. This assay amplifies a portion of the HCV genome and assigns genotype in a single step using primers and probes targeting the NS5b region for genotypes 1a and 1b and the 5'NC region for genotypes 2a, 2b, 3, 4, 5, and 6. The aim of our study was to compare this new assay to two previously commercialized genotyping methods based on the 5'NC region: the TruGene HCV 5'NC genotyping kit (Bayer HealthCare, Berkeley, CA), based on semiautomated sequencing; and the Inno-LiPA HCV II assay (Innogenetics, Gent, Belgium), based on automated reverse hybridization. Discrepant results were resolved though NS5b sequencing and phylogenetic analysis, and suspected mixed-genotype infections were confirmed through PCR cloning and pyrosequencing methodologies.
|
|
|---|
HCV RNA extraction and RT-PCR. For 5'NC sequencing and reverse hybridization, viral RNA extraction, reverse transcription (RT), and PCR amplification procedures were performed using 200 µl of serum with the Cobas Amplicor HCV test (Roche Molecular Systems, Pleasanton, CA) according to the manufacturer's instructions. For the real-time PCR method, RNA was extracted from 220 µl of serum using a QIAamp viral RNA Mini kit (Qiagen GmbH, Hilden, Germany) following the manufacturer's protocol. Amplification and detection were performed on an ABI PRISM 7000 sequence detection system (Applied Biosystems, Foster City, CA) according to the manufacturer's instructions.
HCV genotyping. (i) Inno-LiPA HCV II reverse hybridization assay. The Inno-LiPA HCV II reverse hybridization assay is based on the reverse hybridization principle. Briefly, biotinylated PCR product from the 5'NC region was hybridized to specific immobilized probes. Detection was performed though an enzymatic reaction resulting in a purple precipitate, which was visually interpreted. Hybridization and detection steps were performed on the Auto-LiPA instrument (Tecan Group Ltd., Salzburg, Austria), following the manufacturer's instructions. The probes in this assay allow the identification of the following types: 1, 1a, 1b, 1ab, 2, 2b, 2a/2c, 3, 4, 5a, and 6a.
(ii) TruGene HCV 5'NC genotyping assay. The TruGene HCV 5'NC genotyping assay is based on semiautomated sequencing. Amplified products were purified with a QIAquick PCR purification kit (Qiagen) according to the manufacturer's instructions. Briefly, bidirectional DNA sequencing was performed using two sequencing primers labeled with different fluorescent dyes, followed by electrophoresis and data analysis on the OpenGene DNA sequencing system (Bayer HealthCare). Each bidirectional sequence was automatically aligned to a panel of reference sequences with the GeneLibrarian module of the GeneObjects software (Bayer HealthCare), allowing genotype assignment based on percent sequence identity.
(iii) HCV genotyping ASR assay. The HCV genotyping ASR assay is based on real-time PCR technology and includes probes labeled with different fluorescent dyes specific for genotypes 1a and 1b targeting the NS5b region, as well as primers and probes for genotypes 2a, 2b, 3, 4, 5, and 6 targeting the 5'NC region. Genotype is determined with three reactions per specimen; the mixture for reaction A contains primers and probes that recognize all genotypes to confirm the presence of HCV RNA and primers and probes for genotypes 1a and 1b; the mixture for reaction B contains primers and probes for genotypes 2a, 2b, and 3; and the mixture for reaction C contains primers and probes to identify genotypes 4, 5, and 6. The assay was performed according to the manufacturer's instructions. Briefly, RNA extract was added to each of three master mixes containing primers and probes, manganese reagent, and Z05 DNA polymerase. Following the RT step, 50 cycles of real-time PCR were performed; both steps were carried out by use of the ABI Prism 7000 sequence detection system. Results were analyzed using sequence genotyping software (SGS) v2.0 (Celera Diagnostics, Alameda, CA). Two or more positive amplification signals are identified as a mixed-genotype infection, when genotype cycle threshold values are within three PCR cycles of each other.
Indeterminate specimens by this assay were tested with the HCV genotyping ASR 5' NC region assay. Similarly, primers and probes targeting the 5'NC region are designed to distinguish among 1b, 1 but non-1b, and non-1 infections in a single PCR. Results were interpreted with the sequence genotyping 5' NC region software v2.0 (Celera Diagnostics, Alameda, CA).
(iv) N55b sequencing and phylogenetic analysis. Samples with discrepant results at the genotype or subtype levels were tested by NS5b sequencing. HCV RNA was isolated from 220 µl of serum by use of a QIAamp viral RNA kit (Qiagen). RT was performed with 22 µl of extracted RNA in a total reaction volume of 40 µl containing PCR buffer, 5 mM MgCl2, 1 mM of each deoxynucleotide triphosphate, 0.008 U of random hexamers, 13.6 U of RNasin (Promega, Mannheim, Germany), and 200 U of Moloney murine leukemia virus reverse transcriptase (Invitrogen, Paisley, United Kingdom). Reaction mixtures were incubated at 37°C for 45 min using a Gene Amp PCR system 9700 instrument (Applied Biosystems).
NS5b amplification was performed by nested PCR. The first round of amplification was carried out with 15 µl of the HCV cDNA in a final reaction volume of 50 µl containing PCR buffer, 2.5 mM MgCl2, 10 pmol of primers p1203 and p1204 (20), and 1 U of Taq polymerase (Invitrogen). Amplification was performed on a Gene Amp PCR system 9700 under the following conditions: 94°C for 30 s; 35 cycles at 94°C for 30 s, 54°C for 40 s, and 72°C for 50 s; and a final elongation step at 72°C for 30 s. The second round of amplification was performed adding 2 µl of the first-round product into 48 µl of PCR master mix containing 46 µl of MegaMix Blue (Microzone Limited, West Sussex, United Kingdom) and 20 pmol of each primer (NS5-b n2' [5'TGATACCCGCTGCTTTGACTCNACNGTCAC] and P1204). The following cycling parameters were used: 94°C for 5 min; 30 cycles at 94°C for 30 s, 60°C for 40 s, and 72°C for 50 s; and a final elongation step at 72°C for 30 s. PCR products were purified using a QIAquick PCR purification kit (Qiagen) following the manufacturer's protocol. Amplified products were checked by electrophoresis on 2% agarose gels stained with ethidium bromide. The concentration and purity of DNA were measured with a NanoDrop ND-1000 spectrophotometer (Nanodrop Technologies, Wilmington, DE).
PCR products were sequenced with a BigDye Terminator cycle sequencing ready reaction kit (Applied Biosystems) according to the manufacturer's protocol. Three reactions were performed for each specimen with the forward primer NS5-b n2' and reverse primers 1204 and 123 (5'GCTCTCAGGTTCCGCTCGTCCTCC). Sequencing reaction products were purified with Clean Seq Dye-Terminator removal kit (Agencourt Bioscience Corporation, Beverly, MA) according to the manufacturer's instructions and then sequenced with an ABI PRISM 3100-Avant instrument (Applied Biosystems).
Consensus sequences were obtained using SeqScape v2.1.1 (Applied Biosystems) from forward and reverse primers and aligned with genotyped reference sequences from GenBank by the Clustal W algorithm implemented in MEGA software package v3.1 (16). A region of 222 nucleotides within the PCR product (positions 8316 to 8537 according to reference sequence M62321) was used for phylogenetic analysis. Nucleotide distances were computed on MEGA by the p-distance algorithm, and phylogenetic trees were inferred using the neighbor joining method. The robustness of tree branches was tested by bootstrap analysis (1,000 replicates).
(v) PCR cloning and pyrosequencing. Suspected multiple-genotype infections were confirmed for previously genotyped sera by use of the methodology described in detail in a previous study (4). Briefly, after amplification of a fragment from the 5'NC region, products were checked by gel electrophoresis and treated with genotype-specific restriction endonucleases to digest the dominant genotype. Residual amplicons were purified and subjected to PCR cloning. Ten to 15 transformant colonies were used to generate a biotinylated PCR amplicon, which acted as the template for real-time DNA sequencing, using pyrosequencing (Biotage, Uppsala, Sweden). Generated sequences from minority genotypes were identified by alignment to reference sequences and BLAST analysis (3).
Statistical analysis.
Agreement between pairs of techniques was assessed through the
coefficient (assuming a good concordance for
values between 0.61 and 0.80) when both methods classified specimens into the same categories. Otherwise, Cramer's V was computed. Spearman's rho (
) coefficient was also calculated to determine the correlation among all methods. Fisher's exact test was used to assess agreement among methods used in the retrospective study to those of the prospective study. All statistical analyses were performed with SPSS v14.0 software, and a significance level of 0.05 was used.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Overall comparison of results at the genotype level according to the method used
|
Concordance at the genotype level.
For the analysis of genotype concordance between techniques, only sera with a genotype call by
2 methods (n = 289) were included in our analyses (indeterminate results were excluded). Results obtained by real-time PCR agreed well with those obtained by 5'NC sequencing (214/220 concordant results; Cramer's V = 0.849; P < 0.05) and reverse hybridization (85/86 concordant results;
= 0.982; P < 0.05). Correlation coefficients were also high (Spearman's
values of 0.916 and 0.956, respectively). Although the number of specimens processed both by 5'NC sequencing and reverse hybridization was small, correlation was total (17/17 concordant results;
= 1;
= 1).
Among eight (2.8%) discordant results at the genotype level (Table 2), five mixed-genotype infections were confirmed by cloning and pyrosequencing and/or QCMD. Two of them were detected by reverse hybridization, two by 5'NC sequencing, and one by real-time PCR. When specimen 2 (genotype 3/5 confirmed mixed infection shown in Fig. 1) was tested by real-time PCR, genotype 5 amplified strongly, while genotype 3 amplified 5.8 cycles later than the dominant genotype; therefore, mixed infection was not identified by the software. Among the three remaining discordant specimens, mixed-genotype infection could not be confirmed for two 1/4 mixed infections detected by real-time PCR, and specimen 8 had insufficient volume for further analysis. However, when the latter specimen was tested by real-time PCR, genotype 1b amplified nine cycles later than genotype 4, and NS5b sequencing confirmed the presence of genotype 1b in this specimen.
|
View this table: [in a new window] |
TABLE 2. Specimens with discordant results at the genotype level among the three compared methods and corresponding confirmatory results
|
![]() View larger version (14K): [in a new window] |
FIG. 1. Confirmatory cloning and pyrosequencing results for a specimen with a mixed 3/5 infection. (A) Genotype 5 (ATAAACCCGCTCAATGCCCGGAGATTTGGGCGTGCCCCCGCG). (B) Genotype 3 (AGCAAACCCGCTCAATACCCAGAAATTTGGGCGTGCCCCCGCG). Pyrograms are shown for both HinfI restriction-digested (A) and undigested (B) PCR products from the same specimen. The y axis represents signal intensity in relative light units, and the x axis shows time in minutes and the nucleotide dispensation order. E, dispensation of enzyme mix; S, dispensation of lumogenic substrate. Peak heights represent pyrophosphate release when nucleotides are incorporated to the cDNA strand and are proportional to the numbers of each of the four nucleotides incorporated.
|
Concordance at the subtype level. Regarding genotype 1 infections, the subtyping efficiency for the real-time PCR method was 100% (163/163 genotype 1 infections), while the 5'NC sequencing method assigned a subtype to 102 of 132 genotype 1 infections (77.3%); the remaining 30 specimens were 1a (n = 14), 1b (n = 15), or indeterminate (n = 1) by real-time PCR (the last of these was confirmed as genotype 1b by NS5b sequencing). Similarly, among 46 genotype 1 infections by reverse hybridization, only 34 (73.9%) were assigned a subtype; the other 12 specimens were genotype 1ab by this method, and all were 1a by real-time PCR.
All specimens with a subtype assigned by
2 genotyping methods were compared, and discordant subtypes were confirmed by NS5b sequencing. Among genotype 1 specimens with a subtype assigned both by real-time PCR and 5'NC sequencing (n = 101), 11 (10.9%) gave discordant results (Table 3). One of them was correctly typed as 1b by 5'NC sequencing and typed as 1a/1b by real-time PCR. Among the other specimens, the real-time PCR method was predominantly correct (9/10 cases) according to the NS5b sequencing. Similarly, one of the two discordant results obtained for the 34 specimens subtyped both by real-time PCR and reverse hybridization was typed as 1a/1b by the former assay. The other one was identified as a 1a/4 mixed infection by reverse hybridization that was confirmed as a 1/4 mixed infection by cloning and pyrosequencing, but genotype 1 in that specimen actually belonged to subtype 1b instead of 1a according to NS5b sequencing and real-time PCR.
|
View this table: [in a new window] |
TABLE 3. Genotype 1 specimens with discordant results at the subtype level among the three compared methods and corresponding confirmatory results
|
|
View this table: [in a new window] |
TABLE 4. Genotype 2 specimens with discordant results at the subtype level among the three compared methods and corresponding confirmatory results
|
|
|
|---|
Overall, the real-time assay performed well compared to results obtained by the two other methods. Among the 295 specimens tested by real-time PCR assay, 13 (4.4%) were positive with the universal HCV probe but not reactive to any genotype/subtype-specific probes and were therefore classified as indeterminates. Upon the retesting of genotype 1 specimens with the HCV genotyping ASR 5'NC region assay, the rate of indeterminates decreased to 2%. This is lower than previously reported for this and other real-time-based techniques (8, 18). The amount of HCV RNA did not apparently account for these results, since 14 specimens with a genotype call had viral loads lower than those of indeterminate specimens.
We report a high level of concordance between the results of the three methods, although correlation was higher between the two 5'NC region-based techniques, as expected. Among the discordant results at the genotype level (eight specimens [2.8%]), five were confirmed as mixed-genotype infections by cloning and pyrosequencing and/or QCMD. Mixed-genotype infections have been widely reported, particularly in those multiply exposed to HCV infection (1, 24, 31). Detection rates vary depending on the patient population studied and the HCV genotyping method used (9, 12, 15). In our study, not all confirmed mixed infections could be detected by all the methods used. These results may reflect different sensitivities of the three compared methods at detecting minority types or different sensitivities of each method according to genotype. The criterion used by the SGS v2.0 software to interpret results obtained by the real-time PCR method as mixed infections (the cycle thresholds of the amplified genotypes must be within three cycles of one another) should be reoptimized at least for some of the primer/probe sets. We found this software was too restrictive, and this limited the detection of mixed infections; in a specimen with a 3/5 infection according to QCMD and cloning, the weaker amplification signal was not detected as a mixed-genotype infection. Currently, the most widely accepted methodology to confirm mixed-genotype infection is cloning RT-PCR products and sequencing individual clones. In the method we used, the predominant type was cleaved by genotype-specific restriction endonuclease previous to cloning and pyrosequencing. Thus, this method allowed an effective identification of minority variants without the need for screening a large number of clones. Moreover, pyrosequencing is faster and simpler than standard sequencing. However, two 1/4 mixed infections in our study could not be confirmed by this method. This fact does not completely exclude the presence of a true mixed infection because of several limitations (4): (i) this method is not able to detect a mixed infection when the viral load of the minority genotype is less than 1:10,000 of that of the dominant genotype; (ii) in some cases, the number of clones obtained to screen by pyrosequencing is limited; and (iii) 1/4 mixed infections are more difficult to confirm with this methodology because there is no appropriate restriction endonuclease to specifically cleave genotype 4. Conversely, the two 1/4 mixed infections detected by real-time PCR that could not be confirmed could have been due to cross-reactivity between genotypes 1 and 4 in the real-time assay, as suggested by Cook et al. (8). Our studies indicate that SGS v2.0 software results should be manually reviewed in search of mixed-genotype infections.
Concordance at the subtype level was studied for genotypes 1 and 2, since the real-time method does not include subtype-specific probes for genotypes 3 to 5. Regarding genotype 1, subtyping efficiencies were 100%, 77.2%, and 73.9% for the real-time PCR method and the 5'NC sequencing and reverse hybridization assays, respectively. These data are consistent with other studies that have compared HCV genotyping results based on the 5'NC region (14, 33). The real-time PCR method agreed more frequently with NS5b sequencing than 5'NC region-based methods, as we expected, since discrimination between subtypes within genotype 1 is based on the NS5b region. There were two specimens in which both 1a and 1b subtypes gave a positive signal by real-time PCR. These results could point to the presence of a mixed infection comprising both subtypes, which could not be confirmed by the methods used, recombination, or a low percentage of unspecific binding of primers to their respective subtypes, as previously suggested (8). Regarding genotype 2, most specimens were subtype discordant between techniques, and none of the genotyping techniques assigned a reliable subtype call. Only methods based on the use of more-variable regions, such as NS5b sequencing and phylogenetic analysis, should be relied upon for accurate subtyping of genotype 2 specimens. This method also offered the opportunity to identify new genotype 2 variants. Studies to confirm these results are in progress. Concerning genotypes 3 to 5, no comparison was performed at the subtype level because the real-time PCR assay has only a single probe for each of these genotypes regardless of subtype. Regarding reverse hybridization and 5'NC sequencing, only two specimens belonging to genotype 3 and none belonging to genotypes 4 and 5 were tested by both methods.
The limitations of reverse hybridization and 5'NC sequencing methods for discrimination among subtypes are related to the high degree of conservation of the 5'NC region. Genotypes 1a and 1b differ by a single nucleotide (A/G) at position –99 within this region, and subtypes 2a and 2b differ by only two nucleotides at positions 124 and 164. Moreover, a reliable discrimination of subtype 2a and 2c isolates is not possible based upon sequence analysis of the 5'NC region alone (27, 28). While the clinical significance of the infecting HCV subtype remains unknown, accurate subtyping is necessary for epidemiological purposes, such as outbreak studies, and vaccine trials. Our results confirm that NS5b-based genotyping methods are preferable to 5'NC region-based tests, as previously reported (17, 21, 25). Next-generation HCV genotyping diagnostics are attempting to investigate these more-informative regions. Indeed, a new version of the reverse hybridization assay used in this study (Versant HCV genotype 2.0 assay; Siemens Medical Solutions Diagnostics) has recently been commercialized; this assay comprises probes targeting core and 5'NC regions to improve genotypic precision (22).
In conclusion, although only sequencing-based methods provide the possibility of identifying new HCV variants, the real-time PCR method is suitable for genotyping in routine clinical laboratories. The test is rapid (results available within 2.5 h excluding RNA extraction), straightforward, and simple to interpret, thus providing a good single-step alternative to more-complex assays. Moreover, correlation with the other methods at the genotype level was high, and being based on the NS5b for genotype 1 identification, the real-time PCR method performed better than the other two at assigning subtypes within genotype 1.
We thank the Virus Reference Department, Health Protection Agency, for the development of the oligonucleotide primer n2'. We also thank Eduardo Padilla for his help in study design as well as Sonia Molinos for her help in specimen processing. Finally, we thank Anna Espinal for useful support in statistical analysis.
Published ahead of print on 7 November 2007. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»