Previous Article | Next Article ![]()
Journal of Clinical Microbiology, June 2008, p. 2070-2073, Vol. 46, No. 6
0095-1137/08/$08.00+0 doi:10.1128/JCM.00203-08
Copyright © 2008, American Society for Microbiology. All Rights Reserved.

Microbial Evolution Laboratory, National Food Safety and Toxicology Center, Michigan State University, East Lansing, Michigan 48824
Received 1 February 2008/ Returned for modification 10 March 2008/ Accepted 26 March 2008
|
|
|---|
|
|
|---|
In this report we describe real-time PCR (RT-PCR) assays that are based on hairpin (HP) primers targeting specific SNPs and that differentiate the four predominant O157 clades described previously (8). More importantly, this method rapidly (within 24 h) and accurately differentiates O157 strains belonging to clade 8.
HP primers were constructed for SNP targets (Table 1) in four open reading frames (ORFs), as described previously (6): ECs2357 (hypothetical protein), ECs2521 (para-aminobenzoate synthase), ECs3881 (hybA, hydrogenase 2), and ECs4130 (panF, sodium/panthothenate symporter). Two SNPs involved nonsynonymous polymorphisms and two involved synonymous substitutions (Table 1). Three primers were designed for each SNP: two HP primers, each of which was specific for either the wild type (reference) SNP or the mutant (diagnostic) SNP, and a conserved non-HP primer (Table 2). The HP primers were linked at the 5' ends to form 6- to 10-bp stem structures with the corresponding 3' end. The 3'-end terminal base of the HP primers was complementary to either the reference SNP or the diagnostic SNP. The stem structures for the HP primers were designed to have melting temperatures between 65°C and 69°C to enhance priming specificity. These primer sets were used to differentiate O157 clades 1 to 3 and 8, each of which has a distinct SNP profile (Table 3). The O157 clades were previously constructed on the basis of SNP genotyping data for 538 O157 strains (8).
|
View this table: [in a new window] |
TABLE 1. Four genes with SNPs
|
|
View this table: [in a new window] |
TABLE 2. Hairpin primers and SNP targets
|
|
View this table: [in a new window] |
TABLE 3. SNP profiles of strains
|
HP-primed RT-PCR was performed with an iQ5 system (Bio-Rad, Hercules, CA) by using previously described cycling conditions (6). The reaction mixtures contained 1x SYBR green supermix (Bio-Rad) and 0.25 µM each HP primer and common primer in a 25-µl final volume. The experiments used 1 ng total DNA per reaction mixture or cell lysates from colony picks. To prepare cell lysates, cultures were grown 18 to 20 h at 37°C on SMAC, one colony was transferred into 50 µl sterile water and vortexed, and 5 µl was added to each reaction mixture. The assay results were analyzed with the iQ5 optical systems software (version 2; Bio-Rad).
Critical threshold (CT) values were transformed to cycle threshold differences (
CT) by using the equation CT-R – CT-D, where CT-R is the CT value for the reference HP primers and CT-D is the CT value for the diagnostic HP primers.
CT values reflect the difference in the amplification efficiencies of matched HP primers versus those of mismatched HP primers at each SNP locus of a target DNA sequence, with larger differences representing more robust reactions (6). For all experiments, an average
CT value of <0 denoted specificity of the reaction for the reference SNP, and an average
CT value of >0 denoted specificity for the diagnostic SNP. At least three biological replicates were used for the development of the assay, whereas two replicates were used for the validation experiment. Significant differences in average
CT values among strains of distinct clades for each SNP target were inferred by using a generalized linear model, (
= 0.01), and posteriori multiple contrasts were performed by Fisher's least-significant-difference test (
= 0.05) for comparison of treatment group means.
In the assay development stage, RT-PCR with HP primers for SNPs 539, 1060, 438, and 630 was diagnostic for all 21 strains representing the nine O157 phylogenetic clades identified previously (8). Strains of clades 8 and 1 could be distinguished from strains of all other clades with HP primers for SNPs 539 and 1060, respectively (P < 0.001) (Fig. 1A and B). The average SNP 539
CT was 10.45 ± 0.20, and that for all other strains (n = 16) was –6.49 ± 0.75. Likewise, for clade 1 strains (n = 3), the average SNP 1060
CT was 10.86 ± 0.23, and for all other strains (n = 19) it was –10.08 ± 0.89. Strains from clades 2 and 3 were further differentiated with HP primers for SNP 438 and 630 by a process of elimination (P < 0.001) (Fig. 1C and D). The average SNP 438 and 630
CT values for clade 2 strains (n = 5) were 6.06 ± 0.05 and 3.68 ± 0.38, respectively, and for all other strains except clade 1 strains (n = 14), the
CT values averaged –4.64 ± 0.24. For clade 3 strains (n = 4), the average SNP 438 and 630
CT values were –4.61 ± 0.17 and 3.68 ± 0.54, respectively. As predicted, all strains from clades 4 to 7 and 9 (n = 5) had
CT values of <0 for all SNPs (Fig. 1A to D).
![]() View larger version (16K): [in a new window] |
FIG. 1. Results for optimization of rapid RT-PCR method. Box plots of mean CT values for four SNPs (A to D) as a function of O157 clade are shown, as follows: SNP 539 (A), SNP 1060 (B), SNP 438 (C), and SNP 630 (D). Plot boundaries represent the 25th and 75th percentiles; the median is given by the line. The number of asterisks above each plot denotes statistical difference among clades (P < 0.05).
|
CT values were 9.10 ± 0.47 for strain Spinach (clade 8) and –4.13 ± 0.29 for strain MG1655. For SNP 1060, the average
CT values were 9.82 ± 0.31 for strain Sakai (clade 1) and –8.87 ± 0.63 for MG1655. For SNP 438 and SNP 630, the average
CT values were 3.91 ± 0.21 and 2.89 ± 0.15, respectively, for strain 93-111 (clade 2) and strain EDL933 (clade 3) and –5.74 ± 0.68 and –9.76 ± 0.16, respectively, for MG1655.
![]() View larger version (14K): [in a new window] |
FIG. 2. Box plot of mean CT as a function of SNP for colony picks from SMAC. Open plots represent the mean CT values for positive control strains for each SNP, including strains Spinach (SNP 539), Sakai (SNP 1060), 93-111 (SNP 438), and EDL933 (SNP 630); filled plots represent the mean CT values for the negative control strain, strain MG1655.
|
CT was 10.24 ± 0.41 for clade 8 strains, and the average SNP 630
CT was 2.84 ± 0.59 for clade 3 strains. Only 10/20 clade 2 strains were properly identified; the remaining strains were identified as members of the adjacent clade 1 group, for which there were no representative strains in the blinded study. For strains identified as clade 1, the average SNP 1060
CT was 7.69 ± 1.29, whereas for the remaining clade 2 strains, the average SNP 1060
CT was –7.01 ± 0.87. As suspected, a review of our comparative genomics sequencing data revealed that SNP 1060 for this subset of strains identified as clade 1 contained the T polymorphism in place of G. Interestingly, of the 192 clade 2 strains whose SNP genotypes were determined in this study, the 10 identified as members of clade 1 represented a minority within this sample (18.8%). In conclusion, rapid differentiation of four novel SNPs by RT-PCR methods can detect major outbreak strains and clades of E. coli O157:H7 from SMAC differential medium within 24 h. In particular, clade 8 strains, representative of the 2006 spinach outbreak lineage, can be differentiated from all other clades in a single reaction. Such rapid detection of strains of distinct clades, such as those in clade 8, represents a useful method to detect emergent lineages that are associated with more severe diseases. This assay could therefore be used as a means of detecting hypervirulent O157 strains in a preventative, risk assessment capacity. Clade 1 and clade 2 strains are very closely related and could not be consistently identified by the SNP 1060 assay. Use of the HP primer technology reduces the cost normally equated with the use of the specific primer-probe chemistries without jeopardizing reaction accuracy. It will be insightful in future applications to compare the SNP application to other methods, such as pulsed-field gel electrophoresis and multilocus variable-number tandem repeat analysis (3, 11). It is possible that SNP typing will provide a means of rapid identification before full diagnostic analysis and that it may help to curb the impact of E. coli O157:H7 outbreaks.
The STEC Center is supported with funds from the NIAID, NIH, DHHS, under NIH research contract N01-AI-30058 (to T.S.W.).
Published ahead of print on 9 April 2008. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»