Previous Article | Next Article ![]()
Journal of Clinical Microbiology, April 2009, p. 975-980, Vol. 47, No. 4
0095-1137/09/$08.00+0 doi:10.1128/JCM.01858-08
Copyright © 2009, American Society for Microbiology. All Rights Reserved.

Provincial Laboratory for Public Health, Edmonton, Alberta, Canada,1 National Reference Centre for Parasitology, Research Institute of the McGill University Health Centre, Montreal, Quebec, Canada,2 Department of Medical Microbiology and Immunology, University of Alberta, Edmonton, Alberta, Canada3
Received 25 September 2008/ Returned for modification 22 December 2008/ Accepted 15 February 2009
|
|
|---|
|
|
|---|
Malaria is caused by an infection with Plasmodium, an intracellular parasite that infects the liver cells and red blood cells of its human host. There are five Plasmodium species that can cause human disease, including Plasmodium knowlesi, which is gaining widespread recognition as a human pathogen (5). The ability to correctly identify the species upon the diagnosis of malaria is critical to ensure an appropriate course of therapy. P. falciparum can cause a lethal infection and often requires emergency intervention. Other species can establish a chronic liver stage infection and require tissue schizonticides to destroy this stage and prevent relapses.
The erythrocytic cycle (blood stage) of infection is present in all cases and is responsible for symptoms and signs of infection. Thus, current diagnostic methods target the parasites in peripheral blood. The traditional and least expensive method of diagnosis is microscopic examination of thick and thin blood smears. The sensitivity and specificity of this method are contingent on the techniques used and the skill of the microscopist. In areas where malaria is not endemic, it can be quite challenging to maintain technical expertise in malaria identification (10, 16). Quality assurance programs have been implemented in various countries to maintain proficiency in malaria parasite identification to the species level. However, with low specimen numbers these standards are difficult to sustain. Rapid diagnostic tests (RDTs) based on immunochromatographic antigen detection systems have been implemented in many diagnostic laboratories as an adjunct to microscopy. RDTs are rapid and easy to use and may be cost-effective, providing many advantages over traditional microscopic methods. RDTs are useful for identifying P. falciparum and P. vivax infections but cannot be used to identify P. malariae and P. ovale infections (8).
In recent years, the development of molecular tests for malaria has introduced new diagnostic methods for the detection and identification of malaria parasites to the species level. In particular, real-time PCR has been promoted as an automated, quantitative, and closed system that reduces the risk of cross-contamination inherent in conventional PCR. Several real-time PCR methods for malaria have been described and validated within a research setting with very good sensitivity and specificity (8). However, specific limitations of each assay have largely precluded full implementation of these tests within diagnostic laboratories. Several assays have been developed that can identify P. falciparum but fail to distinguish among P. ovale, P. vivax, and P. malariae (7, 9). One method uses primer sets specific to P. falciparum, P. vivax, and P. ovale but does not include primers to detect P. malariae (18). This method also fails to capture DNA sequence variations in circulating strains of P. ovale (3, 4).
Another major limitation is the ability of these PCR assays to detect mixed Plasmodium infections. For assays that use conserved primers, this is attributed to competition of the primers for multiple templates in the sample (3, 12, 14, 19). Mixed species infections account for 3 to 5% of the malaria infections observed in areas where the disease is not endemic (15, 20). They are particularly challenging for microscopists and represent one aspect of malaria diagnosis where molecular methods can clearly support conventional microscopy. Failure to detect the minor species upon diagnosis can significantly impact patient care.
One of the most sensitive and specific real-time PCR assays for the detection of single-species infections was described by Rougemont et al. and incorporates conserved primers and species-specific probes (19). This is one of the few assays that have been carefully validated with the four major Plasmodium species but is limited by low sensitivity for mixed infections. We have refined this method and developed a real-time PCR assay that could fully support microscopists with species confirmation and identification of mixed infections. We have introduced species-specific forward primers in combination with a conserved reverse primer and species-specific probes multiplexed in a single reaction. Here we describe the validation of this modified assay for the detection of single- and mixed-species infections. We also discuss the implementation of this test for routine confirmatory diagnosis of malaria in Alberta.
|
|
|---|
DNA extraction. Blood from patient samples (40 µl) was diluted in 160 µl of deionized water. DNA extraction was performed with the PSS GC12 instrument (Precision System Science Co. Ltd.) and the DNA 200 extraction protocol and kits (E2003). DNA was eluted into a 100-µl volume.
Plasmids. The 18S gene for each Plasmodium species cloned into the pGEM-T vector (Promega) was kindly provided by Katia Jaton-Ogay and verified by DNA sequencing. In plasmid-mixing experiments, 103 copies of one plasmid were mixed with 103, 104, and 105 copies of the second plasmid and used as the template for the real-time PCR. Cycle threshold (CT) values were based on duplicate samples. Plasmid copy number quantification was performed by spectrophotometric analysis.
Real-time PCR. Real-time PCR was performed under universal conditions (95°C for 15 s, 60°C for 1 min) with the ABI TaqMan 7500. The reaction was performed with a final volume of 25 µl containing 5 µl of DNA, 12.5 µl of TaqMan universal master mix (Applied Biosystems), primers, and probes. The primers and probes used in this study are listed in Table 1 with the respective concentrations for each reaction. The Plasprobe, Ovaprobe, and Malaprobe were synthesized by Applied Biosystems, and the Vivprobe, Falcprobe, and β2 M probe were synthesized by Biosearch Technologies. All probes were purified by high-performance liquid chromatography. Samples were confirmed Plasmodium positive with genus-specific primers Plasmo1 and Plasmo2 and the 6-carboxyfluorescein (FAM)-labeled Plasprobe to detect a region of the Plasmodium 18S gene that is conserved across all five species (19). The Plasmodium species present in the sample were determined with species-specific forward primers Plasmo2 and species-specific probes. The reaction was performed in a single tube with distinct fluorophores for each probe. A cutoff of 40 cycles was used to define positive samples. The testing algorithm also included a number of controls: extraction of TE (10 mM Tris-HCl [pH 8], 1 mM EDTA) as a negative control, β2-macroglobulin (β2 M) target amplification (CT, <40) as a positive extraction control for the specimen (23), a positive reference control to detect any variation between runs, and no-template controls for each of the master mixes.
|
View this table: [in a new window] |
TABLE 1. Primers and probes used for screening and identification of Plasmodium species
|
Microscopy. Results from analysis of thick and thin blood smears were provided by pathologists from regional laboratories throughout Alberta who submitted specimens to ProvLab for PCR testing.
DNA sequencing. Sequencing of PCR products was performed with the primers used for amplification. DNA sequencing was carried out on a Beckman Coulter CEQ2000XL sequencer at the Department of Biochemistry DNA Core Services Lab of the University of Alberta.
PCR confirmation at ProvLab. Our acceptance criteria included EDTA blood samples from patients that were smear positive, regardless of species. Specimens with suspected subpatent parasitemia or an inconclusive smear result were also tested. DNA extracted from whole blood was tested in both the Plasprobe and species identification reactions.
|
|
|---|
Nested PCR also served as the "molecular gold standard" for species identification. We observed 100% concordance between the species identified by nested PCR and by our real-time PCR. This panel included two mixed infections for which the major and minor species were both correctly identified with the new species identification reaction.
The species identification reaction consists of primers and probes for the four major Plasmodium species. In light of the emergence of P. knowlesi as a simian parasite capable of causing malaria infections in humans (5), an additional probe would need to be designed to detect this species. We have successfully detected genomic DNA from P. knowlesi with the Plasprobe and verified that the species-specific primers and probes do not cross-react with this species. This implies that the test can be used as a screening tool for P. knowlesi, although validation with clinical infections of P. knowlesi is required. At present, if a specimen is positive with the Plasprobe but negative in the species identification reaction and the patient travel history is consistent with exposure to P. knowlesi, then further investigation is warranted.
Multiplex species identification can simultaneously detect all four Plasmodium species. Primer competition is a technical concern with multiplex PCRs. As proof of the principle that the species-specific primers and probes are not limiting the detection of all four species, we tested a pool of four templates in the species identification reaction. Genomic DNA was extracted from four clinical samples containing each of the four Plasmodium species at similar concentrations, as judged by their CT values in the Plasprobe reaction. The DNA was pooled in equal volumes and served as the template in the real-time PCR. All four species were successfully amplified and detected in the species identification reaction (Fig. 1). The amplitude of the fluorescence curves varied, perhaps due to the different efficiency of each PCR. Since this pool was generated from clinical specimens, this could be a result of sequence variations within the probe or primer regions for the particular strain. This experiment, along with the validation of the blind panel described above, demonstrates the high specificity of these primers for their target species.
![]() View larger version (19K): [in a new window] |
FIG. 1. Simultaneous detection of four Plasmodium species. A mixture of genomic DNAs of four Plasmodium species served as the template in the species identification real-time PCR. Rn, normalized reporter.
|
|
View this table: [in a new window] |
TABLE 2. Detection of P. falciparum as the minor species in mixed plasmid templates
|
|
View this table: [in a new window] |
TABLE 3. Detection of mixed infections by real-time PCR compared with nested PCR in a blind panel of clinical samples
|
![]() View larger version (26K): [in a new window] |
FIG. 2. Manual baseline correction improves sensitivity for mixed infections. In this specimen, the minor species P. vivax was undetected with the Auto CT baseline parameter (A) but was clearly identified with the Manual CT baseline (B) (cycles 3 to 15). Rn, normalized reporter.
|
All of the specimens submitted to ProvLab for species confirmation are accompanied by the smear result with the species identification. A comparison of the species interpretation by microscopy with the real-time species identification assay was carried out with specimens from 30 patients. The comparison was performed with the microscopy data provided with the first specimen submitted for each patient (Table 4). Nearly half of the specimens were identified as P. falciparum, and these correlated precisely between microscopy and PCR. However, there were a number of discrepancies in the identification of Plasmodium species other than P. falciparum. Two P. ovale infections were identified by microscopy as P. vivax, and one P. falciparum infection was identified as P. ovale. Given that species identification by microscopy was performed by readers in different laboratories with varied levels of expertise, nested PCR was considered the gold standard test for all discrepant results (Table 4). These results were further confirmed by DNA sequencing.
|
View this table: [in a new window] |
TABLE 4. Plasmodium species identification by microscopy versus PCR during routine testing of patient samples
|
|
|
|---|
With these modifications, we implemented this assay as a confirmatory test for malaria species identification in a routine diagnostic laboratory. In comparison with traditional microscopy, the real-time PCR assay was useful for the identification of Plasmodium species other than P. falciparum and identified specimens where the morphological species identification was discordant with the PCR result. Of important clinical significance, four patients with P. falciparum were undiagnosed or misdiagnosed by microscopy. One specimen was incorrectly identified as containing P. ovale. A second specimen was reported as a Plasmodium species other than P. falciparum and in fact contained a mixed infection of P. malariae/P. falciparum. The two other specimens had a low level of parasitemia (<0.1%), which precluded species identification. In one of these cases, a returning traveler presented with a low-level infection of parasites that could not be identified to the species level by microscopy. The next day, the parasitemia had climbed to 5% and the species was identified by microscopy as P. falciparum. However, real-time PCR was able to identify the species as P. falciparum on the initial blood sample and thus could have provided an accurate diagnosis at an early stage of infection. Our current service provides results within 1 week of specimen submission, although a result with this assay can be obtained within 3 h. This shorter turnaround time could rapidly identify undiagnosed or misdiagnosed cases, with an early, direct impact on patient management.
In addition to species confirmation of acute malaria, this test can be applied to a number of clinical contexts that require greater assay sensitivity. For example, it may be relevant for screening refugees arriving from areas where malaria is endemic. These individuals are semi-immune and likely asymptomatic but may harbor low numbers of parasites that could result in a malaria attack within weeks or months of arrival in their destination country (16, 21). This technology may also prove useful in the context of clinical trials for antimalarials, such as the determination of species-specific effects of a given drug combination, quantifying the parasite response to treatment, and identifying resistance that can be correlated with the genotype of the isolate. At the moment, this assay holds great value in support of conventional approaches to malaria diagnosis in correctly identifying malarial species and mixed infections.
We thank Dick MacLean from the McGill University Tropical Diseases Centre and PHAC/National Microbiology Laboratory for financial support of the NRCP. This work was supported by Alberta Health and Wellness.
Published ahead of print on 25 February 2009. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»